319303
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
To empty clear bin, pull back release catch under carrying handle
and raise top of machine.
Lift clear bin out of machine. Remove cyclone top (lid).
Wrap a plastic bag
tightly around the rim
of the clear bin.
Self adjusting
Floor tool
Fit floor tool by pushing
firmly into end of wand.
Tool storage
Press yellow release catch to open the tool
storage cover and insert required tool into
end of wand or wand handle. Please
note that tools may feel warm when
machine has been running; this is
perfectly normal.
Clear bin full mark
Note: Do not fill above this line.
Sits securely
on the stairs
However, always
work above the
machine on stairs for
your own safety.
Do not use strong
detergents and ensure
clear bin is fully dry before
replacing in machine.
Note: The yellow bin inner
should not be removed from
the bin when it is cleaned.
2. Clear bin removal
On/off switch
Press left switch.
Cord rewind
Press right switch for cord rewind.
1. Hose & wand
assembly
Assemble hose and wand by fitting
together at joints , , and . Push
yellow cuffs in until both buttons ‘click
into place.
Press buttons and pull hose to release.
Telescopic wand
Press yellow button and
slide wand down to
adjust length.
2
max
The plug is situated
underneath the tool
cover on the right
hand side.
click
OPTIONAL
1
click
2
3Blockage procedure
Please note: Any ‘Blockage only’ repairs will incur a
charge of $60.00*
. Please check your machine carefully.
Check filters, replacing S-level if older than 3 months
and HEPA if older than 12 months, or if filters are heavily
coated with dust.
*Price correct at time
of printing.
1
4. Remove floor tool from
wand πand check for
blockage.
2. Check wand handle swivel
by pressing yellow buttons and
pulling hose from wand. Clear
any debris.
5. Check air intake hole and check ramp.
2
4
Invert clear bin and wait at least
10 seconds before releasing.
Wipe shroud holes
free of all dust/debris.
max
1
Replace clear bin and cyclone
top and close machine.
Ensure release catch
‘clicks’ into position before
using the vacuum cleaner or
lifting the machine by the
carrying handle.
2 3
4 5
6 7
8
Changing filters
Your DCO2 is fitted with one H-level electrostatic cartridge
filter and one HEPA filter.
Insert top H-level electrostatic filter ensuring that it fits
snugly against the black rubber seal on the machine.
Slide purple HEPA filter into the grooves and push it
down fully.
Automatic suction control trigger
Hold the yellow trigger down to reduce suction for
upholstery and curtains.
To maintain reduced suction, press the trigger down
hard until it clicks. To unlock and resume full suction,
press down the opposite end of the trigger.
1 3
WARNING! For your own safety please
remember to unplug the machine when not in
use and before carrying out maintenance.
3. Check wand joint
by pulling wand
and wand handle
apart. Clear any blockage
with rod or wire.
1. Check entry swivel by
pressing yellow buttons &
pulling out hose.
Clear any debris.
1
2
33
4
IMPORTANT Use only genuine Dyson filters.
1
1
221 H-level
1 HEPA
&
Wand
handle Wand
H-Level
H
Absolute
HEPA
Bactiguard
DC02 ABS Operating Manual 30-08-1999 14:25 Page 1
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dyson dc 02 absolute bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dyson dc 02 absolute in de taal/talen: Engels als bijlage per email.

De handleiding is 0,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Dyson dc 02 absolute

Dyson dc 02 absolute Gebruiksaanwijzing - Nederlands, Deutsch, English - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info