Emergency door release
Water filter
Maintenance
This should be used in the event of a power cut to
remove laundry.
• Switch off and remove the plug from the socket.
• Ensure the drums have stopped moving.
• If the machine has been running on a hot wash, leave it
to cool down.
• Completely drain the washing machine (see section 1002
under ‘coin trap’).
• Remove the soap tray as described in section 1001.
• Using the Dyson spanner or a coin, turn the door release
screw
1
/
4
of a turn anticlockwise to unlock the door,
hold the screw in this position and open the outer door.
• Open inner door.
• Turn the door release screw clockwise through
1
/
4
of a turn,
to ensure the door will close. (This is automatic on some models).
• Replace the soap tray.
10 03
To access the rear of the machine use the Rollerjack
TM
handle to pull the machine out (see section 4 01
for details).
Cleaning the water inlet filters
The water inlet filters should be checked regularly for debris
or limescale build-up (particularly in a hard water area).
Contact your local water authority to find out your water
composition.
• Turn off the water supply to the machine.
• Unscrew both water inlet hoses by hand.
• Using pliers, grip the coloured filters, pull them out and rinse
them under cold water.
NB: Some water may remain in the hoses.
Note: CRO1 Flowcheck and Memory have grey leak protection inlet hoses
• Replace the filters, red to the hot fill and blue to the cold fill,
and reconnect the water inlet hoses.
10 01 .
10 02
