702449
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
8
USING YOUR DYSON APPLIANCE
PLEASE READ THE ‘IMPORTANT SAFETY INSTRUCTIONS’ IN THIS DYSON
OPERATING MANUAL BEFORE PROCEEDING.
ASSEMBLY
Lie the appliance on its back.
Attach the cleaner head by sliding it on to the connections on the lower front part
of the ball. Ensure the electrical plug on the cleaner head fits into the twin-block
connection on the body of the appliance, which is directly above the airway.
Push firmly: the cleaner head will click into place.
Stand the appliance up straight.
Attach the wand handle by sliding it on to the top of the appliance. The spring
clip in the handle will click into place.
Ensure the hose is straight. Press the red button on the hose. Slide the wand into
the hose.
Ensure the hose and wand sit in the recess of the handle. Slide the end of the
wand down into the handle to secure it.
Close the wand cap.
Slide the tool holder onto the side of the duct as shown.
Ensure the cyclone and clear bin unit is secured to the main body of the
appliance.
Attach the tools as shown. In use, the tools can be attached to either the hose or
the wand.
Wind the cable anti-clockwise around the cable hooks. Secure with the clip.
To watch a short online video visit:
UK – www.dyson.co.uk/DC40gettingstarted
ROI – www.dyson.ie/DC40gettingstarted
OPERATION
Unwind the cable.
Plug the appliance into the mains electricity supply.
To switch ‘ON’ or ‘OFF’ press the power button, located as shown.
To use, recline the handle. The stabiliser stand will automatically lift up.
After use, return the appliance to the upright position, pushing it firmly into
place. The stabiliser wheels will automatically lower.
Then unplug the appliance, coil the cable safely and put the appliance away.
Switch ‘OFF’ the appliance, unplug and ensure it is upright before:
– changing or using tools
– removing the hose or airway inspection parts.
Use the cyclone carry handle to carry the appliance.
ATTACHMENTS
To release the wand, open the wand cap and pull the red tube up and away from
the handle until it clicks into place.
Should you wish to use the hose without the wand, follow the above instruction
and press the red button to release the wand from the hose.
CARPETS OR HARD FLOORS
The brush bar will always default to ‘ON’ (spinning) each time you switch the
appliance ‘ON’ and recline it for cleaning.
The brush bar will not rotate when the appliance is upright.
To switch the brush bar off (e.g. for delicate rugs and hard floors):
– switch the appliance ‘ON
– recline the appliance
– press the brush bar ‘ON/OFF’ button – the brush bar will stop spinning.
The brush bar will automatically stop if it becomes obstructed. See ‘Brush bar –
clearing obstructions’.
Before vacuuming your flooring, rugs and carpets, check the manufacturer’s
recommended cleaning instructions.
Some carpets may fuzz if a rotating brush bar is used when vacuuming. If this
happens, we recommend vacuuming in ‘hard floor’ mode and consulting with
the flooring manufacturer.
The brush bar on the appliance may damage some carpet types. If you are
unsure, turn ‘OFF’ the brush bar.
LOOKING AFTER YOUR DYSON APPLIANCE
Do not carry out any maintenance or repair work other than that shown in this
Dyson Operating Manual, or advised by the Dyson Helpline.
Only use parts recommended by Dyson. If you do not this could invalidate
your guarantee.
Store the appliance indoors. Do not use or store it below 0°C. Ensure the
appliance is at room temperature before operating.
Clean the appliance only with a dry cloth. Do not use any lubricants, cleaning
agents, polishes or air fresheners on any part of the appliance.
If used in a garage, always wipe the base plate, ball and stabiliser wheels with
a dry cloth after vacuuming to clean off any sand, dirt, or pebbles that could
damage delicate floors.
VACUUMING
CAUTION:
Do not use without the clear bin and filters in place.
Fine dust such as plaster dust or flour should only be vacuumed in very small
amounts.
Do not use the appliance to pick up sharp hard objects, small toys, pins, paper
clips, etc. They may damage the appliance.
When vacuuming, certain carpets may generate small static charges in the
clear bin or wand. These are harmless and are not associated with the mains
electricity supply. To minimise any effect from this, do not put your hand or insert
any object into the clear bin unless you have first emptied it and rinsed it out with
cold water (see ‘Cleaning the clear bin’).
Powerful suction can cause the hose to ‘pull back’ – please take care.
Do not work with the appliance above you on the stairs.
Do not put the appliance on chairs, tables, etc.
Before vacuuming highly polished floors, such as wood or lino, first check that
the underside of the floor tool and its brushes are free from foreign objects that
could cause marking.
Do not leave the cleaner head in one place on delicate floors.
EMPTYING THE CLEAR BIN
Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.
Switch ‘OFF’ and unplug before emptying the clear bin.
To remove the cyclone and clear bin unit, press down on the red button at the
rear of the carrying handle on the cyclone.
To release the dirt, press all the way down on the red button at the rear of the
carrying handle on the cyclone.
To minimise dust/allergen contact when emptying, encase the clear bin tightly in
a plastic bag and empty.
Remove the clear bin carefully.
Seal the bag tightly, dispose as normal.
To refit:
– close the clear bin base so it clicks into place
push the cyclone and clear bin unit into the main body of the appliance; it will
click into place
– ensure the cyclone and clear bin unit is secure.
For a free fact sheet visit: www.dyson.co.uk/technology/allergy
CLEANING THE CLEAR BIN
Remove the cyclone and clear bin (instructions above).
To separate the cyclone unit from the clear bin press the red button to open
the clear bin base. This exposes a small silver button behind the red opening
mechanism. Press the silver button and separate the cyclone unit from the
clear bin.
Clean the clear bin with cold water only.
Ensure the clear bin is completely dry before replacing.
Do not use detergents, polishes or air fresheners to clean the clear bin.
Do not put the clear bin in a dishwasher.
Do not immerse the whole cyclone unit in water or pour water into the cyclones.
Clean the cyclone shroud with a dry cloth or dry brush to remove lint and dust.
To refit the bin to the cyclone unit:
fit the cyclone shroud into the clear bin so that the silver button clicks and
engages
– close the clear bin base so it clicks into place
push the cyclone and clear bin unit into the main body of the appliance; it will
click into place
– ensure the cyclone and clear bin unit is secure.
WASHING YOUR FILTERS
Your appliance has two washable filters, located as shown.
Check and wash the filters regularly according to instructions to maintain
performance.
Switch ‘OFF’ and unplug before checking or removing the filters.
The filters may require more frequent washing if vacuuming fine dust.
Wash with cold water only. Do not use detergents.
Do not put filters in a dishwasher, washing machine, tumble dryer, oven,
microwave or near a naked flame.
To remove filter A see the ‘Wash filters’ section in this Dyson Operating Manual.
After washing lay the filter on its side and leave at least 24 hours to dry
completely before refitting.
To remove filter B:
turn the central locking dial on the outer cover of the ball anti-clockwise until
the cover is released
– lift off the cover
– turn the filter one-quarter anti-clockwise to release.
Filter B should be rinsed and tapped out until the water runs clean, then tapped
out again to ensure all excess water is removed. Leave to dry completely for
24 hours.
It is normal for the filter in the ball to turn grey in colour.
To refit filter B:
– refit the filter on to the ball
– secure the filter by turning it one-quarter turn clockwise.
When refitting the outer cover of the ball, keep turning the central locking dial
clockwise. When it starts to click it is locked.
To watch a short online video visit:
UK – www.dyson.co.uk/DC40filterwash
ROI – www.dyson.ie/DC40filterwash
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dyson DC40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dyson DC40 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info