702345
31
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
31
EN
Using your Dyson appliance
Please read the ‘Important Safety Instructions’ in this Dyson
operating manual before proceeding.
Carrying the appliance
Carry the appliance by the main handle on the body.
Do not press the cyclone release button or shake the appliance
when carrying or the cyclone could disengage, fall off and
cause injury.
Operation
Always extend the cable fully to the red tape before use.
Plug the appliance into the mains electricity supply.
To switch ‘ON’ or ‘OFF’ press the red power button, located
as shown.
After use: Unplug, push the cable retract button firmly until cable
has fully retracted.
Switch 'OFF' the appliance and unplug before:
Changing tools.
Removing the hose.
Self-adjusting cleaner head with
suction control
Your appliance has a self-adjusting cleaner head with suction
control. This cleaner head is used for testing with the European
Regulations: No. 665/2013 and No. 666/2013 and testing shall be
performed in Max mode (+).
Easy mode (-)
Reduced push force for effortless cleaning.
For vacuuming of lightly soiled carpets, rugs and hard flooring.
Your appliance is pre-set to this level of suction when you take it out
of the box.
Max mode (+)
Maximum suction for powerful dust and dirt removal.
For vacuuming durable floor coverings, hard floors and heavily
soiled carpets and rugs.
To switch to this setting, move the suction control slider on top of
the cleaner head as shown.
CAUTION: The suction of this mode can damage delicate
flooring. Before vacuuming, check the flooring manufacturers
cleaning recommendations.
If the suction power of Max mode (+) prevents easy
manoeuverability, switch to Easy mode (-).
Vacuuming
Do not use without the clear bin and filter in place.
Fine dirt such as flour should only be vacuumed in very
small amounts.
Do not use the appliance to pick up sharp hard objects, small toys,
pins, paper clips, etc. They may damage the appliance.
When vacuuming, certain carpets may generate small static
charges in the clear bin or wand. These are harmless and are not
associated with the mains electricity supply. To minimise any effect
from this, do not put your hand or insert any object into the clear
bin unless you have first emptied it and rinsed it out with cold water
(see ‘Cleaning the clear bin’).
Do not work with the appliance above you on the stairs.
Do not put the appliance on chairs, tables, etc.
Before vacuuming highly polished floors, such as wood or lino, first
check that the underside of the floor tool and its brushes are free
from foreign objects that could cause marking.
Do not push hard with the floor tool when vacuuming, as this may
cause damage.
Do not leave the cleaner head in one place on delicate floors.
On waxed floors the movement of the cleaner head may create an
uneven lustre. If this happens, wipe with a damp cloth, polish the
area with wax, and wait for it to dry.
To reduce suction (for example, when vacuuming rugs), pull the
suction release trigger on the handle to reduce the airflow.
Blockages – thermal cut-out
This appliance is fitted with an automatically resetting thermal
cut-out.
If any part becomes blocked the appliance may overheat and
automatically cut-out.
If this happens, follow the instructions in ‘Looking for blockages’.
NOTE: Large items may block the tools or wand inlet. If this
happens, do not operate the wand release catch. Switch ‘OFF’ and
unplug. Failure to do so could result in personal injury.
Looking for blockages
Switch ‘OFF’ and unplug before looking for blockages. Failure to
do so could result in personal injury.
Leave to cool down for 1-2 hours before looking for blockages.
Beware of sharp objects when checking for blockages.
To access the flexible inspection hose beneath the clear bin, first
remove the clear bin (see 'Emptying the clear bin').
Unscrew the two Phillips screws on the clear bin locator bracket.
(Do not remove any other screws.) Remove the bracket.
Firmly twist the flexible inspection hose away from the inlet next to
the ball (do not remove the end next to the connection for the main
hose).
Inspect for blockages.
Clear any blockage before restarting.
Refit all parts securely before using.
Please refer to 'Looking for blockages' illustrations or 'Online
support' section for additional guidance.
Clearing blockages is not covered by your guarantee.
Emptying the clear bin
Empty as soon as the dirt reaches the level of the MAX mark – do
not overfill.
Switch ‘OFF’ and unplug before emptying the clear bin.
To remove the cyclone and clear bin unit, push the release button to
the side of the carrying handle, as shown. The carrying handle will
be released.
To release the dirt, press the red bin release button.
To minimise dust/allergen contact when emptying, encase the clear
bin tightly in a plastic bag and empty.
Remove the clear bin carefully from the bag.
Seal the bag tightly, dispose as normal.
Close the clear bin base so it clicks into place and is secure.
Place the clear bin and cyclone unit into position on the front of the
1
2
3
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dyson Ball bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dyson Ball in de taal/talen: Alle talen als bijlage per email.

De handleiding is 6,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Dyson Ball

Dyson Ball Gebruiksaanwijzing - English - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info