585220
19
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
18
Troubleshooting
Review the following possible solutions if you encounter a problem while using your printer.
If you need further assistance, visit the DYMO Web site at www.dymo.com.
Problem/Error Message Solution
Battery Discharged
Attach the power adapter.
Recharge the battery pack. See Recharging the Battery Pack.
Insert new AA alkaline batteries.
Poor print quality
Clean the print head. See Cleaning Your Printer.
Adjust the print contrast. See Adjusting the Print Contrast.
Check battery level; power may be low.
Label Jam
Motor is stalled due to label jam.
Open the label cartridge compartment and remove the cartridge.
Remove jammed label, clearing the jam.
Clean the cutter blade. See Cleaning Your Printer.
Make sure the label passes smoothly through the label guides on the label
cartridge and that the label and ribbon are taut across the mouth of the
cartridge. See Inserting and Removing the Label Cartridge.
Uneven or slanted printing
The cartridge is not positioned correctly.
Check the label cartridge compartment to make sure the cartridge is
inserted properly. See Inserting and Removing the Label Cartridge.
Make sure the two levers in the label compartment are locked on either side
of the cartridge holding the cartridge in place.
Cannot close the label cartridge lid
The cartridge is not inserted correctly.
Make sure nothing is blocking the cartridge cover and that the label cartridge is
inserted properly. See Inserting and Removing the Label Cartridge.
Unable to return to the previous menu
Press
to return to the previous menu.
Nothing shows in the display
Ensure the printer is turned on.
Insert new batteries, charge battery pack, or plug in power adapter.
Remove power adapter and batteries; reattach power to restart the printer.
No label found
No cartridge is present.
Open the cartridge compartment and insert a label cartridge. See Inserting
and Removing the Label Cartridge.
Display text is too light to read
Turn on backlight. See Using the Backlight.
Adjust the display contrast. See Adjusting the Display Contrast.
Maximum number of lines reached Insert a wider label cartridge.
Too many lines for selected label width
Reduce the number of text lines.
Insert a wider label cartridge.
Maximum number of characters reached Reduce the number of characters for the label.
Printing... No action required. Message disappears when printing is finished.
Barcode not allowed
Barcodes cannot be printed on 6mm (1/4”) labels,
wire/cable labels, or breaker labels.
Insert a wider label cartridge.
Change the label width.
Change the label type.
No response when pressing keys
One of the keys may be jammed.
1 Press each key to determine which key is jammed.
2 Press the jammed key firmly until the key returns to the normal position.
How do I remove the backing from the label? DYMO labels have an easy-to-peel split back.
1 Locate the split on the label backing.
2 Gently pinch the label lengthwise, folding toward the
printed side of the label. The label backing will
separate.
3 Carefully peel away the backing from the label.
Split label
19

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Dymo-Rhino-4200

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dymo Rhino 4200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dymo Rhino 4200 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Dymo Rhino 4200

Dymo Rhino 4200 Gebruiksaanwijzing - Nederlands - 22 pagina's

Dymo Rhino 4200 Gebruiksaanwijzing - Deutsch - 22 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info