650110
5
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
8 9
- Check that voltage indicated on the rating label corresponds to the mains
voltage in your home.
- Wash all parts (except body) with warm soapy water.
Assembling
- While holding the head, inset it into the inlet
(g.1). Rotate the head in the same direction as
g.2 until a click can be heard. Move the head
slightly to ensure it is placed in securely.
- Place the feed screw into the head (long end
rst) by turning the feed screw until it is set into
the motor housing (g.3).
- Place the cutting blade onto the feed screw
shaft with the blade facing the front as
illustrated (g.4). If it is not tted properly, meat
will not be ground.
- Place the desired cutting plate next to the
cutting blade, tting protrusions in the slots
(g.5).
- Support or press the centre of the cutting plate with one nger then screw
the xing ring until tight with the other hand (g.6). Do not over tighten.
- Place the hopper plate on the head and x into position.
- Place the unit on a at, non slip surface.
- The air passage at the bottom and the side of the motor housing should be
kept free and not blocked.
First Time Use
Instructions for Use
Cleaning and Maintenance
Mincing Meat
- Cut all food into pieces (boneless and fatless meat is recommended, approx
20mm x 20mm x 60mm) so that they fit easily into the hopper opening.
- Plug in and press the ON/OFF button to turn on the machine.
- Feed food into the hopper plate. Only use the food pusher (fig.7)
- After use, switch the unit off and unplug it from the power supply.
Reverse Function
- In case of jamming, switch the appliance off by pressing the ‘ON/OFF
button and press the "REV" button.
- Feed screw will rotate in the opposite direction and the head will become
empty.
- If it doesn’t work, switch the unit off and clean it.
Disassembling
- Make sure that the motor has stopped completely.
- Disconnect the plug from the power outlet.
- Disassemble by reversing the steps from images 6-1.
- If the xing ring is not easily removed by hand, please use tools in g 12.
- To remove the cutting plate easily, place a screwdriver between the cutting
plate and the head as illustrated and lift it up (g.13).
- Press the unlock button before removing the head. Holding the head, rotate
it in the same direction as g. 14. The head can then be removed easily.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Duronic MG1600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Duronic MG1600 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info