612069
71
Verklein
Vergroot
Pagina terug
1/74
Pagina verder
6 Basic adjustment of the positioning drives
The function of the positioning motor is determined by its program,
setting of the motor parameters and stop positions of the sewing
machines. If the sewing machine is supplied in a disassembled
condition, the motor should be set by the purchaser. If the sewing
machine is supplied in an assembled condition, the motor has already
been set by the sewing machine manufacturer.
Attention!
The parameter value must be changed with consideration and
responsibility. A wrong setting of the control can cause the damage of
the sewing machine!
6.1 DAC basic/classic drive
The sub-class of this drive type has already been pre-set in the
purchased control unit on c ondition that the sub-class is known to the
manufacturer; i. e. a complete sewing machine and a drive have been
purchased. This can be changed either by a new software installation
by means of a D AC Dongle device and by a s ubsequent selection of
the sub-class, which is done when a separate control unit DAC has
been bought. Another possibility is the installation of the parameter
set by connecting a s o-called sewing machine identification (Masch.ID)
with the existing parameter set of the particular sub-class to the DAC
unit. This possibility can be made use of if the client has already owned
the same sewing machine with the DAC drive, and when the client
wants to copy the parameter set from that.
After the parameter set installation it is necessary to set the reference
position for the correct positioning (usually, the needle tip at the level
of the throat plate) at the parameter t0810, and then to adjust, if
needed, the maximum sewing speed at the parameter t0800.
Detailed information and a detailed description of the parameter
setting is included in the publication “Operating instructions DAC
basic/classic” enclosed by the drive manufacturer, “Parameter sheet
DAC basic/classic”, which is specific for the particular sub-class, or at
the website w w w.duerkopp-adler.com.
6.2 DAC eco drive
The same rules are applicable to the DAC eco drive for the sub-class
selection, and the software installation is the same as for the DAC
basic/classic drives. Only the hardware manufacture of the units is
different, and that is why the interface for the DAC Dongle device is
common with the control pedal interface, and the parameter setting is
realized by means of the pushbuttons on the control box front panel.
Detailed information with a detailed description of the parameter
setting is included in the publication “Operating instructions DAC eco”
enclosed by the drive manufacturer, or at the website
w ww.duerkopp-adler.com.
21
EN
71

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Durkopp Adler 888 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Durkopp Adler 888 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Durkopp Adler 888

Durkopp Adler 888 Gebruiksaanwijzing - Deutsch - 74 pagina's

Durkopp Adler 888 Gebruiksaanwijzing - Français - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info