612051
30
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
No. Subject Chapter Correct setting Adjustment
Sewing foot height and
sewing foot lifting
9 Sewing foot lifting with the
lifting lever
3.1 The distance between the lifted
material presser foot and the throat
plate must amount 7 mm.
Shift the material
presser bar
10 Sewing foot lifting with the
knee lever
3.2 When both feet lie on the throat
plate, there should be a clearance
of 1 mm between the lifting lever
and the presser plate.
Set the adjusting
screw.
11 Limitation for the sewing
foot lifting
3.2 The clearance between the
material presser foot and the throat
plate should amount 12 mm.
Adjust the stop.
Opening the thread tension
12 Mechanical opening 4. When the thread tension is opened,
the clearance between the release
plate and the release pin must be
approx. 1 mm.
File or replace the
release pin.
13 Thread controller spring 4.1 Spring travel:
The needle thread is under tension
from the highest position of the
thread lever to the moment the
needle’s eye penetrates the sewing
material.
Spring tension:
Depending on the materials to be
sewn.
Turn the whole
thread tension unit
Turnthetensionpin.
Needle bar
14 Needle bar height 5. In the loop stroke position the hook
point should be located in the
middle of the needle furrow.
Adjust the height of
the needle bar.
Hook settings
15 Loop stroke 6.1 The loop stroke amount to 2 mm. In
the loop stroke position, the hook
point lies at the middle of the
needle. Check using the gauge and
the block.
Turn the hook.
16 Clearance of the hook point
to the needle
6.1 In the loop stroke position, the
clearance between hook point and
the furrow of the needle must be
max. 0.1 mm.
Slide the hook
axially.
Bobbin case holder
17 Bobbin case holder 6.2 The clearance between the bobbin
case holder and the lower part of
the bobbin case should amount
1.5 mm
Set the bobbin case
holder.
Bobbin winder
18 Bobbin fill quantity 8. The bobbin winding operation stops
automatically when the bobbin is
filled up to approx. 0.5 mm below
the edge of the bobbin.
Slight changes:
Bend the release
lever slightly
26
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Durkopp Adler 69-373H bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Durkopp Adler 69-373H in de taal/talen: Engels als bijlage per email.

De handleiding is 0,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info