734327
14
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Assembly
Unless otherwise instructed, do not fully tighten all fixings until assembly is complete.
1.
Attach the front stabilizer (2) and the rear stabilizer (3)
to
the main frame (1) using bolts
(4)
and flat
washers (5) .
2.
Attach the saddle (8)
to
the saddle stem
(9)
using nylon nuts and locking washers (11) pre attached
on
the saddle.
3.
Locale a computer cable (15)
in
the computer box,
to
thread this cable down the handlebar stem (12),
let male socket stick out of the top end of handlebar stem and the female socket at the bottom end .
Before placing the handlebar stem onto the main frame plug
the
computer cable ( 15) and connect the
resistance controller (14) by pushing the cable nipple (14c) into the slot of cable connector (13c), see
illustration
.
Coupling the handlebar stem onto the main frame and secure with bolts (16) and curved washers (17) with
Allen Key (28).
Be
sure all the cables fitted into the main frame properly without pinches.
4.
Slide the handlebar (19) into the handlebar holder which welded
on
the handlebar stem (12). Adjust the
handlebar
to
desired angle and tighten with handlebar locking knob
(21
, fitted). This unique handlebar
allows the rider a full range of comfortable riding position from upright
to
the crouch of professional
cyclist. Precaution : before commencing crouch position, rider should repeatedly test the tightness of the
locking knob for safety.
Fit the handlebar grips (20) onto the handlebar, you may require a little of soap
on
the handlebar
to
ease
this operation. Fit two small end plugs provided with handlebar grips onto the both ends of the handlebar.
Plug the male socket of the computer cable to the computer's jack
at
the back panel then "click-
in
" the
computer onto the welded bracket
on
the handlebar stem.
lnsert the plug of the ear clip (24) into the pulse terminal hole
on
the computer's facia.
5. Slide the assembled saddle stem into main frame and select desired height by screwing the seat
adjusting knob (18).
Be
sure the knob
is
screwed tightly before sitting
on
the saddle.
6.
Important : Secure the left side peda! (22L), onto the crank by turning the thread anti-clockwise,
however, secure the right side pedal (22R) by turning the thread clockwise
as
usual manner. A letter
"R" and "L" is marked at the end of the thread respectively. To distinguish right and left hand side at
rider's position. Tighten the thread by fingers before using multi spanner (27).
Tips
1. Follow this assembly manual carefully.
2. Make sure all bolts and nuts are securily tightened, using the provided locking washers.
3.
This hometrainer has been designed for a long and unproblematic use. Please check all bolts and nuts
regular ly: and apply lubrication to moving parts regula ly.
Caution !
1.
Do
not wear loose fitting clothing that could become entangled
in
any moving parts.
2. Do always wear shoes when you exercise.
3. Keep the unit out of reach for childreri.
4. Consult your physian before starting any exercise program.
5. Stop exercising immediately
in
case of nausea, shaki
ng
, shortness of breath , pain
in
the chest or
headache.
6.
Do
not exercise 45 minutes before eating or 1 houre after eating.
-13 -
14

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Dunlop-Concept-3600

Zoeken resetten

  • Ik zoek een handleiding voor de DUNLOP Proline3500. Mag ook in het Engels, Frans of Duits zijn.
    mheuninck@gmail.com Gesteld op 23-12-2020 om 11:28

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dunlop Concept 3600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dunlop Concept 3600 in de taal/talen: Nederlands, Frans als bijlage per email.

De handleiding is 5,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info