488612
4
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
4
ORIGINAL INSTRUCTIONS
Before using the Dremel VersaFlame, make sure you read and
understand this manual completely.
!
WARNING
READ ALL INSTRUCTIONS.
Failure to follow all instructions listed below may result in fire
and/or serious injury.
SAVE THESE INSTRUCTIONS
1. WORK AREA
a. Keep work area clean and well lit. Cluttered and dark areas
invite accidents.
b. Do not keep combustible materials near the tool.
c. Keep children and bystanders away while operating the tool.
Distractions can cause you to lose control.
d. Only use the tool outdoors or in well-ventilated rooms.
2. PERSONAL SAFETY
a. Stay alert, watch what you are doing and use common
sense when operating the tool. Do not use the tool while
you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating tools
may result in serious personal injury.
b.
Use safety equipment. Always wear eye
protection. Safety equipment such as a dust
mask, non-slip safety shoes, hard hat and hearing
protection used for relevant conditions will reduce
personal injuries.
c. Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in
unexpected situations.
d. Dress properly. There is a danger of burning yourself with
the flame or with liquid soldering tin. Wear protective
clothing to protect yourself against burns. Keep your hair,
clothing and gloves away from the flame. Loose clothes or
long hair can catch fire.
e. Secure the workpiece. Use a clamping device to hold the
workpiece. This allows you to use both hands to operate the
tool.
f. Keep this manual for future reference.
g. Do not use the appliance when it is leaking (gas smell),
shows any sign of damage or is malfunctioning.
h. If the appliance is leaking (gas smell) immediately take
it outside and check the leak-tightness without a flame.
Always use soapsuds. (Re)filling the gas tank must be
done in a well-ventilated place far away from any possible
sources of ignition, open flames, pilot lights, electrical
cookware and away from other persons. Be sure to observe
the safety instructions and warning notices on the refill
container. Do not make any modifications to the tool.
i. Do not work materials containing asbestos (asbestos is
considered carcinogenic).
j. Take protective measures when during work dust can
develop that is harmful to one's health, combustible or
explosive (some dusts are considered carcinogenic); wear
a dust mask and work with dust/ chip extraction when
connectable.
3. TOOL USE AND CARE
a. Store your tool in an appropriate place with an ambient
temperature between 10°C and 50°C. Allow your tool to fully
cool down before storing. Unused tools should be stored away
from children in a dry location. Switch off all unused tools.
b.
!
WARNING
Always switch off the tool and allow it
to fully cool down before attaching or
removing the accessories or before cleaning.
c.
!
WARNING
Extremely flammable gas under
pressure.
d.
!
WARNING
Do not use near sparks or an open
flame.
e.
!
WARNING
Do not puncture or incinerate the gas
tank or store at a temperature above
50ºC.
f.
!
WARNING
Keep out of reach of children.
g.
!
WARNING
Do not try to disassemble this unit.
4. SERVICE
a. Have your tool serviced by a qualified repair expert using
only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
ENVIRONMENT
DISPOSAL
The tool, accessories and packaging should be sorted for
environment-friendly recycling.
SPECIFICATIONS
GENERAL SPECIFICATIONS
Description . . . . . . . . . . . . . . Dremel VersaFlame
Model number . . . . . . . . . . . 2200
Power source . . . . . . . . . . . . Refined butane gas
Gas tank capacity . . . . . . . . 42 ml / 22 grams
Run time . . . . . . . . . . . . . . . ± 75 minutes (highest setting)
Heat-up time . . . . . . . . . . . . ± 25 seconds (soldering tip)
Nominal heat input . . . . . . . 16 g/h
Cool-down time . . . . . . . . . . 17 min (< 25°C)
Temperature . . . . . . . . . . . . 1200°C (open flame)
680 1000°C (hot air)
550°C (soldering tip)
Weight . . . . . . . . . . . . . . . . . 227 grams (empty tool)
GB
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dremel 2200 Versaflame bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dremel 2200 Versaflame in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 5,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info