768202
7
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
2.0 FEATURE HIGHLIGHTS
R699760 - DreamBee 2 User Manual 7
the button again.
2.0 FEATURE HIGHLIGHTS
2.1 Motorized Focus and Zoom
The new Optical Lens features a motorized Zoom and Focus that can be accessed from the RCU or through the On
Screen Display using the Back Panel buttons of the projector.
Using the internal green X-hatch pattern
With the RCU:
a) Press repeatedly the [TEST] button on the RCU until you get the green X-hatch test pattern.
b) Then press [LEFT] button for 1 second until the Setting Focus window appears.
c) Use the [UP] and [DOWN] buttons to change the Focus.
d) Press [ENTER] to set the Zoom using [UP] and [DOWN] buttons.
•From the Back Panel or RCU using the On Screen Display (OSD):
a) Press [MENU] button, and browse to the Install Menu.
b) Select the Test Pattern Menu.
c) Select the green X-hatch test pattern.
d) Press [LEFT] button for 1 second until the focus setting window appears.
e) Use [UP] and [DOWN] buttons to change the Focus.
f) Press [ENTER] to set the Zoom using [UP] and [DOWN] buttons.
Using an external test pattern (for advanced user)
a) Connect your calibrated source to an available input.
b) Set your programmable RCU or RS-232 device with ZoomT, ZoomW, Focus+ and Focus- functions. (See
page 15 for more details)
c) Display the desired test pattern and make the adjustments.
2.2 Gamma menu
Setting the correct value to the Gamma
Gamma is the relationship between the color values of the data and the color values displayed. The Gamma
coefficient makes it possible to adjust the brightness of the midtones only affecting the very bright and very dark
areas. If gamma is set to high, middle tones appear to dark. If it’s set too low, middle tones appear too light. The
Gamma correction can be set to Normal, Theatre1, Theatre2, Dynamic or Custom.
Normal uses the factory default calibration and will suit most setup.
Theatre1, Theatre2 and Dynamic use lower gamma values that can be directly changed using the RCU by pressing
[Gamma] button, choose the best setting to your ambient environment.
To prevent the lamp lifetime to get shortened, the projector cannot be switched OFF right after the lamp
warm-up. This is normal, wait 60 seconds until you can switch OFF the projector.
Never unplug the projector when it is switched ON, it may damage the lamp.
The Focus and Zoom adjustments cannot be set manually.
LIGHTTEST
EXITMENU
ENTER
Press [ENTER] to switch
between Focus and Zoom
adjustment
Focus +
Zoom +
Press [EXIT] to return to
Test Pattern Menu
Focus -
Zoom -
Green X-hatch pattern,
press [LEFT] button for 1
second to enter Zoom and
Focus menu.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DreamVision DreamBee 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DreamVision DreamBee 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info