653176
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Battery Handling
Batteries, rechargeable or not, should not be disposed
of into ordinary household waste. Instead, they must be
recycled properly to protect the environment and cut down
the waste of precious resources.
Your local waste management authority can supply details
concerning the proper disposal of batteries.
In compliance with the EU Directive 2006/66/EC, the button
cell battery located on the printed circuit board inside the
product, can be removed at the end of the product life, by
professional personnel only.
Note: Settings
changes can be
made via the
MiTime unit
MiStat
Current room temperature
+hr key: Press to add up
to 3 hours to the current
period or to get instant
1 to 3 hours if currently
off (see step 8).
key: Press to
toggle between
Comfort setting, Eco
setting and Home
(Room thermostat
only). See table below.
key: Press to
cancel +hr and display
home. (Cylinder
thermostat only)
Select key: Press
to open and save
editor screens
Current Setting,
see table below
Current set temperature
Call for heat indication.
Thisame will be visible
when the room
temperature is below
the set temperature.
+ & - keys:
Press to change
the current
temperature or
turn the heat on
if currently off
RF transmission indication.
The RF symbol will be
visible as follows,
Short flashes indicates an
RF transmission.
Long flashes indicates an RF
transmission issue.
Symbol in
display
Function Description
Comfort setting
Selects the comfort setting. The pre-set value is used
each time when activated, adjustable within the menu
Eco setting
Selects the Eco setting. The pre-set value is used each
time when activated, adjustable within the menu.
None Home screen
Indicates that the pre-set temperatures were changed
via +/- key
Press Select to enter a specific
Setting. Options shown below:
Feature: Description: Factory Pre-Set:
Help Tips Describes the button functions
Holiday switch
off
In the period until holiday starts the product will operate normally.If holiday
is disabled manually or terminates automatically, the mode before start
of holiday will be re-instated.An enabled holiday will be indicated with a
suitcase symbol in the top line. If holiday is active, in the Set: line the holiday
end date will be indicated. In the Summary screen the suitcase will be visible
together with the holiday temperature.
Status Enable or disable holiday mode. Disabled
Zones Holiday mode can be applied to a specific zone or
all zones
All zones
Holiday start
time (From)
Set the time for the start of your holiday Current time -
nearest hour
Holiday start
date (From)
Set the date for the start of your holiday Today
Holiday end time
(To)
Set the time for the end of your holiday Current time -
nearest hour
Holiday end date
(To)
Set the date for the end of your holiday Today + 1 week
Time and date settings
Set time To set time of day Factory set
Set date To set date Factory set
Daylight saving To enable or disable daylight saving Enabled
Clock format To select 12h or 24h clock mode 12hr
Feature: Description: Factory Pre-Set:
Programme
Timetable
On & Off times for the current period can be
modified. See description in ‘Step 4’
Copy days Will copy the current day to one or more other days
Add Period Adds a Time event. It will be added at the correct
position within the day. There is a maximum of 4
periods.
Remove Period Removes the selected period. There needs to be at
least 1 period
Change
Timetable Type
The visible day-blocks available in "programme
timetable" can be defined, see Step 4
Individual days Each day can be programmed individually
Week and
weekend
Mon… Fri and Sat… Sun can be programmed as 2
blocks
Default
All week Mon…Sun can be programmed as one block
Stored
programmes
MiTime contains 3 pre-set programmes. These
programmes can be modified according to personal
needs and can be stored by using a name. Via this
name they can also be re-loaded. Once a programme
has been modified, the original factory pre-set will no
longer be available unless a System Reset is applied -
see Installation Guide Step 4.
Programme 1
Load stored
programme
A pre-set programme can be loaded
Save current
programme
The current programme can be saved by name (Each
pre-set program includes: Individual days, week/
weekend, all day and custom day schedules)
Step 6: Additional User Settings
Step 7: Keys and Display - MiStat Step 8: +hr (Boost) Step 9: Changing the Batteries
RF Pack: MiStat N110R, MiStat C110C
How do I know when to change
the batteries?
When the batteries start to run low a battery icon will
flash in the display to indicate “low battery, during
this time the MiStat will function normally. When the
battery icon alone is alone is shown in the display, the
batteries are completely exhausted and the MiStat will
cease to function (see below). Re-activate by replacing
the batteries.
How to replace the batteries
Remove the battery covers as shown. Replace the batteries with 2 x 1.5V IEC LR6 (AA) Alkaline batteries ensuring
correct orientation. Replace the battery covers pressing fully home.
Battery Covers:
Slide outwards
to remove
MiStat Rear
MiStat
MiStat
MiStat
MiStat
MiStat
Troubleshooting:
Press +hr to Boost
MiStat
Press +/- to adjust +hr period between 0 and 3 hours
Press ( ) to confirm
Now the Boost is running. The time will be counted
down each hour.
Once the time has elapsed, control returns to the
prior temperature screen.
The Boost can be cancelled by pressing the (
) key
or by setting the +hr period to 0.
1 Setting temperature values is restricted
a
Are Minimum/Maximum temperatures activated?
see Installation Guide Step 8.
2
NO SIGNAL is visible on the screen, no reaction on
key presses anymore
a
Is the receiver powered? (Red signal lamp should
be visible)
b
Is the room thermostat powered? see Homeowner
Guide Step 9.
3 LOCKED is displayed on the room themostat
a see Installation Guide Step 8 - Screen Lock
4 Is the battery symbol visible?
a Replace batteries, see Homeowner Guide Step 9.
5
STARTING is visible on the thermostat screen, no
reaction on key presses anymore
a
Is the receiver powered? (Red signal lamp should
be visible)
6
WAIT is visible on the thermostat screen, no reaction
on key presses anymore
a
Is the receiver powered? (Red signal lamp should
be visible)
Step 5: Period Settings
Stored programmes
MiTime contains 3 pre-set programmes. An
example is shown below. These programmes can
be modified according to personal needs and
can be stored by using a name. Via this name they
also can be reloaded. Once a programme has
been modified, the original factory pre-set will no
longer be available. On a System Reset, only the
current loaded programme will be replaced with
the factory setting – see Installation Guide Step 4.
All week Week & Weekend
Mon-Sun Mon-Fri Sat-Sun
Programme 1
Example:
Step 4: Prog. Timetable
Zone = Heating
Help text: Use left/right buttons to
select the days you want to change
Period 1 settings: describes the current timetable
settings, e.g. Heating has been programmed to
turn On at 6:30am and go off at 8:30am
Period 2 settings: describes the current timetable
settings, e.g. Heating has been programmed to
turn On at 4:30pm and go off at 10:30pm
Press select (
) when highlighted to adjust
settings (see Step 5)
Up to 4 periods can be programmed
Arrow denotes that further options are
available if you scroll down.
Timetable day range: Monday to
Friday (Week and weekend)
Options: Individual days (7day), Week and
weekend (5/2day), All week (24hr). The
available blocks depend on the selection
in menu change timetable type
Link to Copy days
Day range & period
Help text: Use left/right buttons to
change fields
Period settings: On at 6:30am and Off
at 8:30am
Highlight shows adjustable field:
Use up/down buttons to adjust values
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Drayton MiTime T740M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Drayton MiTime T740M in de taal/talen: Engels als bijlage per email.

De handleiding is 2,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Drayton MiTime T740M

Drayton MiTime T740M Installatiehandleiding - English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info