DOMO DO-200SW
PARTS LIST
1. Sweeper Power Head
2. On / Off Switch
3. Charging Light Indicator
4. Dust Cup (Container)
5. Rotating Brush
6. Transparent Brush Cover
7. Edging Tool
8. Charging Jack
9. Lower Handle
10. Metal Extension Handles
11. Upper Handle
12. Charging Adapter
13. Gear Box
NOTE: Cordless Sweeper is shipped with the batteries uncharged. Charging of the unit for a
minimum of 20 hours prior to first use is required.
ASSEMBLING YOUR CORDLESS SWEEPER
Before you start:
Your Cordless Sweeper will require very little assembly. You should remove it from the carton and
familiarize yourself with all the components listed per the exploded view drawing . This will help you
in the assembly and operation of your cordless sweeper.
Note: The charging adapter and the lower handle are shipped inside the dust cup.
1. Insert the Edging Tool into the "square" hole under the bottom of the sweeper power head. Gently
but firmly push until the edging tool locks into place.
2. Insert the lower handle - small end - into the sweeper power head. Make sure that the ribbed side
of the handle is pointing down. Push until firmly in place. Now rotate the handle 180° so the
ribbed side of the handle points upwards.
3. Assemble the metal extension handles by pushing the plastic insert into the mating metal tube.
Push firmly. Push the handle assembly into the upper handle.
NOTE: One metal extension tube has a different plastic insert. This tube should be on the
bottom of the handle.
Insert the handle assembly into the lower handle.
27