500172
15
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
15
GB
5 Maintenance
5.3 Cleaning the exhaust filter
Check the exhaust filter each time you check the motor protection filter,
ZChapter 5.2, ‘Cleaning the motor protection filter’.
Clean the exhaust filter as soon as you see it is dirty.
Replace the exhaust filter as soon as it deforms or is damaged
(ZChapter 5.4, ‘Spare parts and accessories’).
1. Switch off the appliance, ZChapter 4.3, ‘Switching off’.
2. Push down the release catch of the exhaust filter cover and fold down
the cover (Fig. 13/A).
3. Remove the exhaust filter from its holder (Fig. 13/B).
4. Thoroughly rinse the exhaust filter by hand under clear, cold or luke-
warm running water.
5. Put the new / cleaned and completely dry exhaust filter back into its re-
ceptacle (Fig. 13/B).
6. Fit the exhaust filter cover on the bottom side first (Fig. 14/A) and then
push it into its receptacle (Fig. 14/B). It might be easier if you push
down the release catch in the process (Fig. 13/A).
7. Check the exhaust filter cover for correct fit.
5.4 Spare parts and accessories
Orders by fax or post: ZPage 48, ‘International Service’
Further information: Z www.dirtdevil.de
5.5 Recommendation
We recommend: Swirl
£
AirSpace
£
Y50
£
dust filter bags with MicroPor
£
filtration
Swirl
, AirSpace
, MicroPor
and Y50
are registered trade marks of a company of the Melitta group and used with their permission.
5.6 Before you send in the appliance
Before contacting us (ZPage 48, ‘International Service’) or even sending
the appliance to us, use the table to check whether you can correct the
problem yourself.
AB
13
B
A
click!click!click!
14
ATTENTION:
The filters are washable, but not suitable for cleaning in washing
machines or dishwashers. Do not use cleaning agents for cleaning.
Leave the filters to dry after cleaning them with water (approx. 24 hours
at room temperature). Only put them back into the appliance when they
are completely dry.
ATTENTION:
Only use original spare parts from the scope of delivery or those that you
have purchased by reordering.
Item number Description
7000022 Set of 5 dust filter bags and 1 motor protection filter
7066002 1 exhaust filter
M203-4 1 parquet brush
M208-8 1 turbo brush
M219 1 mini turbo brush
WARNING:
Danger of injury! Never use a defective appliance! Always switch off the
appliance and disconnect it from the mains before starting troubleshoot-
ing ZChapter 4.3, ‘Switching off’.
Problem Possible cause / solution
Filter bag
change indi-
cator (Fig. 1/
4) appears in
the display
window.
The dust filter bag is full. Change the dust filter bag,
ZChapter 5.1, ‘Changing the dust filter bag’.
Nozzle, tube, or suction hose is blocked.
Remove the obstacle. If necessary, use a long wooden
stick (e.g. a broomstick) to do this.
The filters are dirty. Clean the respective filter ZChapter
5.2, ‘Cleaning the motor protection filter’ or ZChapter 5.3,
‘Cleaning the exhaust filter’.
The vacuum
cleaner stops
suddenly.
The overheating protection has tripped (possibly due to
blocked suction channels, filters, or similar). Switch the
appliance off and pull the plug out of the socket. Eliminate
the cause of overheating (e g. remove blockage). Wait for
about 45 minutes. After the appliance has cooled off, you
may switch it on again.
The cleaning
results are
unsatisfac-
tory in spite of
the appli-
ance work-
ing correctly.
The bypass vent (Fig. 1/20) is open. Close the bypass
vent (Fig. 1/20).
The power setting does not suit the flooring. Set the pow-
er to the setting suggested for the flooring, ZChapter 4.2,
‘Vacuum cleaning’, step 4.
The position of the ‘carpet/hard floor’ selector (Fig. 1/29)
is unsuitable. Set the ‘carpet/hard floor’ selector (Fig. 1/
29) to the correct position for the type of floor, ZChapter
4.2, ‘Vacuum cleaning’, step 5.
The attached nozzle is unsuitable. Change the nozzle,
ZChapter 3.2, ‘Assembly’.
The dust filter bag is full. Change the dust filter bag,
ZChapter 5.1, ‘Changing the dust filter bag’.
The filters are dirty. Clean the respective filter ZChapter
5.2, ‘Cleaning the motor protection filter’ or ZChapter 5.3,
‘Cleaning the exhaust filter’.
Nozzle, telescopic tube or suction hose is blocked. Re-
move the obstacle. If necessary, use a long wooden stick
(e.g. a broomstick) to do this.
Problem Possible cause / solution
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dirt Devil M 7066 Cargo bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dirt Devil M 7066 Cargo in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 3,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info