739140
11
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
18 19
Product Operation Malfunction Routine
Step 1: Turn on the host power and set the host as the dormant state with APP
Step 2: Set the host as pre-upgrade state
Step 3: Start the firmware upgrade on the APP interface
Step 4: Wait for the completion of host upgrading
If distribution network is available, turn on the host power, wait for the successful connection
between host and APP (the connection time may be different due to different network environments),
click "Dormant" button on the APP control interface and set the host as dormant state.
Enter the APP host operation interface, click "..." on the upper right corner, choose "Check firmware
upgrade", and press "immediate upgrade button" when APP pops up a dialog box "new equipment
firmware is found".
Wait for seconds, enter the upgrade state after the host makes prompt tone and "START" key shows
red breathing light, and the APP interface also shows the current upgrading process.
After the host makes prompt tone and "START" key shows yellow light, the host upgrading is
completed. APP returns to the host operating interface. (Note: Whether upgrading is successful
depends on the prompt tone of the host and the yellow light of "START" key, APP may prompt
upgrade failure when the host is upgraded successfully due to the version or network.)
Press "START" key and hold on, click "Wakeup" button on the APP control interface, wait for seconds,
and enter the upgrading state after the host makes prompt tone and "START" shows white light.
If the host is in the pre-upgrade state after powering on but the mobile phone APP is not connected
with the host, complete distribution network under the pre-upgrade state. Refer to "Fast networking"
in manual for the distribution network process, and pay attention to whether "START" key shows
white light when distribution network is successful under the pre-upgrade state.
Upgrading state cannot exit once start, please don't turn off the power supply or do other
operations.
If the upgrade fails, please turn off the host power and wait for 1s before turning it on again, and
the host will enter the pre-upgrade state directly.
Please upgrade it according to the operating steps of "Mode II" before using.
Some part may be adjusted slightly due to continuous development and upgrading of APP, the
actual version shall prevail.
Notice:
Turn on the power switch and press
"START" key to start the machine.
Unplug the power supply of direct
charging port and turn on the power
switch.
When the machine is in the
charging state, press START key
or the Start/Stop key on remote
control; the machine will not
be separated from charging
base automatically or enter the
cleaning state.
The fan fails to work when
installing dust bin for cleaning
(the machine fails to absorb dust
or the wind power is reduced).
The machine has the action of
"Backward->rotate constantly" or
"rotate constantly" after startup.
The machine has the
"Backward>turning->action for
consecutive three times during
operation.
The machine has "Backward"
turning->action every 2 - 3s
when there are no obstacles.
The power switch of the machine
is not turned on.
The power supply is inserted in
direct charging port.
Dust bin is not installed. Install the dust bin .
Clean the dust bin
Clean the suction port
Contact with the customer
service personnel for
treatment.
The dust bin has too much dust.
The suction port is blocked with
foreign matters or hair.
The fan is abnormal.
The collision light filter has dust
or is abnormal.
Wipe the dust
Shake the collision rod
Rotate the universal wheel by
hand and check whether it is
clamped, if yes, pull it out directly
for cleaning.
The cliff sensor has dust or is
abnormal.
The collision rod is clamped.
Fault of universal wheel
Malfunction routine
Error
Possible cause Solution
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dibea D500-B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dibea D500-B in de taal/talen: Engels als bijlage per email.

De handleiding is 9,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info