585339
3
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
WSRC 3000
Desktop Weather Station
Introduction
This desktop weather station comes with weather forecasting capabil-
ities, clock, calendar, day, temperature and humidity display. It is pow-
ered by the supplied AC/DC adapter. Optional it can be powered by
batteries. It is recommended to use the AC/DC adapter at all times.
1 [ SNOOZE / LIGHT ] button
2 Base
3 [ ALM SET ] button
4 [ +/C/F ] button
5 [ HISTORY ] button
6 [ MODE ] button
7 [ CHANNEL ] button
8 [ -/RCC ] button
9 [ MAX/MIN ] button
10 Battery compartment
11 AC-DC in jack
Getting started
It is recommended to set up the remote temperature sensor before
setting up the weather station / clock. See "Configuring Remote Tem-
perature Sensor(s)" below for more information.
Installing the AC/DC adapter
1. Remove all "AAA“ batteries before plugging in AC/DC adapter if
necessary. See instructions below.
2. Plug in AC/DC adapter to the AC-DC input jack (11).
3. Connect AC/DC adapter to the mains. Ensure access to the
power adapter plug is not obstructed by furniture or such. For
safety reasons, only use the power adapter plug supplied.
Batteries installation (optional)
1. Open battery compartment (10) on the back of the unit.
2. Install / replace with 3x "AAA" size batteries in the compartment. lt
is recommended that only alkaline batteries are used.
3. Replace the battery compartment cover (10) on the back of the unit.
4. A short beep will be heard to confirm proper installation of batteries.
Batteries safety warnings
1. Please read all instructions carefully before use.
2. Install batteries correctly by matching the polarities (+/-).
3. Always replace a complete set of batteries.
4. Never mix used and new batteries.
5. Remove exhausted batteries immediately.
6. Remove batteries when not in use.
7. Do not recharge and do not dispose of batteries in fire as the bat-
teries may explode.
8. Ensure batteries are stored away from metal objects as contact
may cause a short circuit.
9. Avoid exposing batteries to temperature or humidity extremes or
direct sunlight.
10. Keep all batteries out of reach from children. They are a choking
hazard.
11. Please retain packaging for future reference.
Setting up the weather station
The weather station will beep once when batteries are installed or the
AC/DC adapter is plugged in.
1. The double digits will flash showing the level of your location above
sea level at the bottom right hand corner of the display.
Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to change your unit
location level above sea level. The sea level units are in meters (1
meter equals approximately 3.28 feet). Contact your local weather
bureau or authorities for more information if required.
2. Press [ HISTORY ] button (5) to confirm location of the unit above
sea level.
3. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to change the cur-
rent weather situation of your location. See figure below for the
weather pattern that best resembles your immediate area.
4. Press [ HISTORY ] button (5) to confirm weather pattern.
Interpreting the weather forecast symbols
1. The weather station requires at least 24 hours to acclimatise to
local weather conditions. The weather station will process and
analyse the weather patterns of the past 24 hours in order to deter-
mine the future weather. The predicted weather forecast may not
accurately reflect the actual weather for your immediate area till 24
hours have elapsed.
2. The weather station will display the symbols (see above) to indicate
the predicted weather forecast for the next 12 to 24 hours for an
area within a radius of approximately 30-50 km.
Note:
1. The weather forecast is only for reference and only for domes-
tic use. Do NOT rely on the weather station for a forecast for
any serious matter including but not limited to: personal health,
any business or financial decisions, and/or agricultural plan-
ning. And certainly NOT for life and death situations.
2. The weather forecast does not display the current weather. It
displays future weather situation.
Adjusting the weather station
1. Press [ HISTORY ] button (5) for 3 seconds until a beep is heard.
2. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to select between
atmospheric pressure units of pascal (hPa) to inch of mercury
(inHg).
3. Press [ HISTORY ] button (5) to confinn.
4. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to select between
absolute and relative atmospheric pressure.
5. Press [ HISTORY ] button (5) to confinn.
6. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to change your unit
location level above sea level.
7. Press [ HISTORY ] button (5) to confirm unit location level above
sea level.
8. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to change the cur-
rent weather situation for your location. See above for the weather
pattern that best resembles your immediate area.
Barometer
The unit takes approximately 24 hours to process and analyse the
recorded barometric pressure data. Prior to 24 hours, the pressure trend
and weather forecasts may not reflect actual weather forecast for your
area.
Reading pressure trend
Recorded memory of the barometric pressure changes are displayed
with 3 arrows to show pressure trend.
Note: It is only possible to measure the barometric pressure trend prop-
erly when the unit remains at the same altitude location. When moving
around at different altitudes within a short period of time, the air pressure
and the barometric pressure will change. The pressure trend will only be
correct and regular if the unit remains at a constant location altitude
for 24 hours or more.
To recall recorded pressure history reading
The barometric pressure reading is recorded in hourly intervals and
can be recalled and displayed for the previous 12 hours.
Press [ HISTORY ] button (5) repeatedly to view pressure recorded
for the past hours. “-1 HR" indicates the pressure of the previous
hour. The pressure reading history will appear for 20 seconds before
the current pressure reading returns.
To synchronize clock with RCC
1. Where available, this clock will automatically synchronize with
the radio control towers at the following time: 02:03, 03:03,
04:03, 05:03.
2. User may also manually synchronize the clock by following the
instructions below.
3. Hold down the [ -/RCC ] button (8) for approximately 3 seconds
until is flashing.
4. When this signal is flashing, the clock is attempting to synchro-
nize with the radio control tower. The symbol will flash when a
strong signal is received and the clock will synchronize with the
radio control tower. This process can take up to 7 minutes. The
symbol will stop flashing and will be displayed once the signal
is received and is in synchronization.
5. The symbol will not be displayed if the clock is not able to syn-
chronize within this period of time. User may manually synchro-
nize again at a later time or the clock will automatically attempts
to synchronize at the above mentioned time.
6. Please note all other clock / weather station settings cease to
function when the clock is in RCC synchronization mode. Wait
until the clock is no longer attempting to synchronize or it is syn-
chronizing to set other clock and weather station functions.
7. lf the alarm goes off during synchronization mode, RCC synchro-
nization will cease immediately. Follow the above instructions
again to set synchronization.
RCC Zone Offset
This clock is equipped with radio controlled time adjustment. The user
will need to work out the time zone signal they receive at their current
location and make (any) adjustment as required.
This function also allows for daylight saving adjustment. Contact your
local weather bureau or authorities for more information.
1. Press the [ -/RCC ] button (8) once for +1 time zone.
2. Press the [ -/RCC ] button (8) once again for +2 time zone.
3. Press the [ -/RCC ] button (8) once again for -1 time zone.
4. Press the [ -/RCC ] button (8) once again for same time zone.
To set time manually
1. Hold down the [ ALM SET ] button (3) for approximately 3 sec-
onds until the display is flashing.
2. Press [ +/C/F ] button (4) or [ -/RCC ] button (8) to change the
hour setting. Press [ ALM SET ] button (3) to confirm.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dexford WSRC 3000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dexford WSRC 3000 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 0,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info