585376
15
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
15
Setting the alarm time
You can programme 2 different alarm times in the radio−controlled clock.
1. Press and hold the Mode button (7) until Alarm 1 or Alarm 2 appears in the display.
2. Press and hold the Mode button (7) for 3 seconds (hour digits flash).
3. Use the Up/Down buttons (6/5) to set the required hour and confirm the selection by pressing the Mode button (7).
4. Use the Up/Down buttons (6/5) to set the required minute.
5. Press the Mode button (7) to confirm the setting and activate the alarm time.
Note! If you do not complete any input for a setting for 30 seconds, the process is cancelled and the clock returns
to the Alarm 1 or Alarm 2 display.
Switching the alarm on/off
1. Press the Alarm button (3) to switch the alarm function settings in the following cycle: Alarm 1 activated, Alarm 2
activated, Alarm 1 and Alarm 2 activated, Alarm 1 and Alarm 2 deactivated.
2. When the alarm time activated is reached and the alarm goes off, press the Light/Snooze button (1) to interrupt the
alarm for approx. 5 minutes before it continues again.
3. Press the Alarm button (3) to switch the alarm off, whereby it is switched off permanently for Alarm 2 or switched off
until the same time the next day for Alarm 1.
Note! If you do not press the Alarm button (3) or Light/Snooze button (1), the alarm is automatically switched off
after 4 minutes.
Setting the foreign time
In addition to setting the local time, you can also set the time of a location abroad and switch the display between the two
times.
1. Press and hold the Up button (6) for 3 seconds when the default display is shown. The foreign time display appears
together with an F".
2. Press and hold the Mode button (7) for 3 seconds (hour digits flash).
3. Use the Up/Down buttons (6/5) to set the required hour and confirm the selection by pressing the Mode button (7).
Note! If you do not complete any input for a setting for 30 seconds, the process is cancelled and the clock returns
to the foreign time display.
4. Press and hold the Up button (6) for 3 seconds when the foreign time display appears. The default display reappears
and the F" disappears. You can switch between default display and foreign time display at any time.
Back−lighting
Press the Light/Snooze button (1) to switch on the back−lighting for 5 seconds.
Changing the time format
Press and hold the Up button (6) when the default display is shown in order to switch between the 24−hour and 12−hour
time format (AM/PM).
Radio signal reception
The clock attempts to synchronise with the DCF signal every hour. You can also initiate reception of the DCF signal
manually by pressing and holding the Temperature button (4) for 3 seconds. The reception indicator (12) appears in the
display during the process.
Possible sources of interference for radio signals
D Domestic household equipment without RFI suppression
D TV sets less than 2 m away
D Machines producing HF stray fields (high frequency)
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dexford RCT 170 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dexford RCT 170 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 0,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info