615478
5
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
ENG 6
ENGLISH
ENG 7
ENGLISH
Setup – Vox function
The VOX feature allows you to disable the display of the parent unit and activate it when the
baby unit (camera) captures a noise, such as baby's crying. You can set the sensitivity level:
high sensitivity and low sensitivity.
To enable the VOX function follow these steps:
1.Power ON parent unit.
2.Press OK button to enter in the main menu.
3.Press or
buttons to select SETUP option then press OK button.
4.Press or
buttons to select VOX ON/OFF parameter then press button to enable the
function (ON) or disable the function (OFF).
5.Press OK button to conrm the selection then press button to exit from main menu.
To set the VOX sensitivity level follow these steps:
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or buttons to select SETUP option then press OK button.
4.Press or buttons to select VOX SENSE parameters then press button to select the
desired sensitivity level (HI or LOW).
5.Press OK button to conrm the selection then press button to exit from main menu.
If you set high sensitivity (HI) and the LCD panel in the parent unit never switch
OFF, it means that in the room there are noises. Before to set the nal value we
suggest to perform some test in order to select the correct value. Usually the
LOW level is correct to switch ON the LCD panel in the parent unit when there
are loud noise as crying baby or when he wakes up.
ALERT
Setup - TV Mode
This parameter allows you to set the TV mode if you connect the parent unit to an external
TV system by using the A/V OUT connector.
To set the TV mode follow these steps:
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or buttons to select SETUP option then press OK button.
4.Press or buttons to select TV MODE parameter then press button to set PAL or NTSC.
5.Press OK button to conrm the selection then press button to exit from main menu.
In most european countries the main TV mode is PAL. In France is supported
too SECAM.
In most american countries the main TV mode is NTSC.
Setup – LCD Bright
This parameter allows you to set the LCD panel brightness level in the parent unit.
To set the LCD bright follow these steps:
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or buttons to select SETUP option then press OK button.
4.Press or buttons to select LCD BRIGHT parameter then press or to set the level
desired (0 – 4).
5.Press OK button to conrm the selection then press button to exit from main menu.
Main Menu – TV OUT
The parent unit has an AV OUT connector to connect the appliance to an audio video device
as TV or VCR. In the packaging there is available the audio/video cable. To connect the parent
unit to an external TV system follow these steps:
1.Connect the cable to AV OUT connector available in the right side of parent unit.
2.Connect the 3 RCA connectors (yellow, red and white) to audio/video INPUT in the TV or
VCR:
•The yellow connector is the VIDEO signal.
•The red and white connectors are the stereo audio signal.
3.Power ON the parent unit.
4.Press OK to enter in the main menu.
5.Press or buttons to select TV OUT then press OK button. The LCD panel
in the parent unit will turn OFF and the images will be displayed on TV
screen.
To turn ON the LCD panel in the parent unit follow these steps:
1.Press OK button to enter in the main menu.
2.Press or buttons to select LCD OUTPUT option then press OK button.
The LCD panel in the parent unit will turn ON and you can disconnect the
audio/video cable.
To restore the LCD Panel view you can also turn OFF the parent unit and power
ON it again.
Baby Unit – description
This chapter provides a complete description of the Baby Unit functions.
1.Antenna
2.InfraRED LED for night vision
3.Lens
4.Microphone and speaker
5.DC Input and power LED
6.Power ON/OFF button
2
1
3
4
5
Base with batteries compartment
6
Baby Unit - Batteries
The Baby Unit supports two power systems:
•5VDC – 1.000 mA power adapter available in the packaging.
•3 x AAA standard batteries not included in the packaging.
NOTE
NOTE
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denver SC-17 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denver SC-17 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 1,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info