3. Rechargeable NiMH batteries
When in Test Mode, camera will be automatically shut down to save power if without
any operation within 3 minutes; it could be waked up by any movement detection.
When in low power state, camera will also automatically shut down. Please change the
batteries in time.
Slot 4
Slot 2
Slot 3
Slot 1
2.2 Insert the MICROSD-card and the SIM-card
Insert MICROSD-card and SIM into the card slot.
When use MMS/E-mail function, be sure to insert SIM-card into the SIM-card slot
correctly.
MicroSD
Supporting 2G/GSM/MMS/GPRS service
2.3 Enter into the TEST Mode
Turn the power switch to the TEST position to enter into the TEST mode. There are some
functions in TEST mode: user settings, manually capture, preview.
2.3.1 User Settings
Press the MENU button. The camera can be set (mode, interval, picture resolution, video
resolution& length, etc.) the detailed operations will be described in following chapter.
2.3.2 Manual Capturing
Press OK to manually capture photos or record video.
2.3.3 View Images or Videos
There are two ways to view the captured images or videos:
1. LCD screen on camera
2. TV monitors which connects to camera with TV cable
Press right arrow to view captured files, the latest image will be shown in the LCD screen
or TV monitor. Press UP to view the last and press DOWN for the next. The detailed
operations like deleting images or videos will be described in “Advanced Operations”
chapter.
2.4 Power on and Enter into the ON Mode
Before switching on, please pay attention to the following items:
1. Do not face light source directly. These may cause false triggers
2. The height from ground for placing should be 1-2 meters. For example for deer height is good size
appropriately.
After switching on the camera, the red light will blink for about 10s. The 10s is a
buffering time before automatic capturing, e.g. for closing and locking the bottom cover,
fixing the camera on a tree and walking away.
2.5 Power Off
Slide the power switch to OFF position to turn off the camera.
Therefore, please remove the battery if the camera will not be used for a long time.
3.Advanced Operations
This chapter explains that user settings can only be done in TEST mode and the remote
control is needed.
3.1 Settings Menu
Press MENU when camera in the TEST mode. The settings menu will be shown on the
LCD or the external TV monitor.
3.1.1 Photo Setting
3.1.2 Video Setting
4