Left and right flying trim
2. When the drone flies left/right, press
the right/left trim button to adjust.
If the trim buttons do not correct the problem, place the drone on
a flat surface and recalibrate as follows.
Press the calibration button (see illustration).
Then the LED of the drone flashes quickly and the calibration is
finished when the LED lights up.
HEADLESS MODE
Headless mode: When pressing the headless button, two beep tones are emitted.
(In this mode, the flying direction is still controlled by the controller.) No matter where the
forward direction is, it is according to the operation of the controller. It is very simple and
convenient. Press this button again, to exit headless mode; a beep tone is emitted.
One-button return
Within the controllable range, no matter where you are, after pressing this button, you will hear
a beep tone and the drone will return to its original position. Move a joystick of the controller or
press the button again to quit this mode.
HIGH SPEED AND LOW SPEED
Press this function button to change the speed of the drone during flight. There are 3 speed
levels available: low, medium and high. When pressing the button, two beep tones will be heard
and you changed to medium speed. Press the button again an three beep tones will be heard and
you changed to high speed. Pressing the button a third time will return to low speed and a single
beep tone is emitted…
3D FLIP
