665113
2
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
POWER CONNECTION
Plug the AC power cord to a household outlet AC source. This unit
is equipped with a battery back up system, it requires a 3V CR2032
at lithium battery (not included). Insert the battery in the battery
compartment, making certain that the positive and negative (+ and -)
battery terminals are attached to the corresponding terminals on the
plate in the battery compartment. If an AC power failure occurs, the
clock automatically switches to the battery power supply, the clock and
timer memory continue running. When the AC power resumes, the clock
switches back to AC again.
GETTING STARTED
TIME MANUAL SETTING
With the radio off mode, press and hold the SET.MEM / M+ button (7)
; “24 Hr” will blink. Press the Tune + (8) or Tune – (4) button to set the
unit to the 12 hour (12 Hr) mode or 24 Hour (24 Hr) mode. Press the
SET.MEM / M + button (7) and the hours will blink. Press the Tune+ (8)
or Tune – (4) to set the current hour, then press the SET.MEM / M + (7)
button again; the minute digits will blink. Press the Tune + (8) or Tune –
(4) to set the current minutes. When done and you press SET.MEM / M +
(7) button once again to indicate the current time is set.
THE LED DIGITAL CLOCK AND THE PROJECTION CLOCK MUST BE
SET SEPARATELY.
TIME SETTING FOR PROJECTION
To preset the HOURS, press simultaneously the HOUR button (10) and
the TIME button (14). Keep them depressed until the hour digits to be
preset are displayed. To preset the MINUTES, press simultaneously the
MINUTE button (13) and the TIME button (14). Keep them depressed
until the minutes digits to be preset are displayed. Focus setting: To
adjust the brightness of the projection clock, turn the focus (12) until the
projected time is clearly shown on the ceiling or wall.
NOTE: The projected time is intended for display on the ceiling or wall of
a darkened room. The projection range is 3 – 9 feet.
ENG-2
2

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Denver-CRP-716

Zoeken resetten

  • Ik krijg het alarm niet op radio stand?
    Groet nina Gesteld op 6-4-2021 om 21:23

    Reageer op deze vraag Misbruik melden
  • Lukt ook mij niet om projectie voor plafond in te stellen terwijl ik instructies volg.
    lucreations@skynet.be Gesteld op 26-12-2017 om 10:17

    Reageer op deze vraag Misbruik melden
    • jazeker ik heb ook van alles geprobeerd volgens handleiding

      handleiding is goed alleen is er niet vermeld dat je de projektie aan moet zetten en op plafond of muur richten dan zie je tijd verschijnen en kan jhe met de kleine knopjes achter projector instellen

      veel succes wim visseren wbvisseren@hotmail.com Geantwoord op 26-12-2017 om 11:59

      Waardeer dit antwoord (2) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denver CRP-716 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denver CRP-716 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Denver CRP-716

Denver CRP-716 Gebruiksaanwijzing - Nederlands - 6 pagina's

Denver CRP-716 Gebruiksaanwijzing - Deutsch - 7 pagina's

Denver CRP-716 Gebruiksaanwijzing - Français - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info