1. Press “HOUR TU -” button (2) repeatedly to change the ‘hour’ setting.
2. Press “MIN TU +” button (3) repeatedly to change the ‘minute’ setting.
3. Press “SET/PRE M+” button (7) to confirm at the time and the display will stop
flashing.
Note: The time and alarm times can only be set when the radio is turned off.
SETTING THE ALARM TIME
This clock radio has dual alarms that can be set and used independently. The procedure to
set both alarms is the same. Both alarms can either sound the buzzer or wake up to radio.
Press “AL1 VOL -“ button (5) for viewing alarm time 1 with buzzer. Press “AL1 VOL -“ button
(5) again for viewing alarm time 1 with radio. Press “AL1 VOL -“ button (5) again back to
current time.
Above instructions are for viewing alarm time 1. To view alarm time 2, follow the
above instructions and use “AL2 VOL +” button (6) instead of “AL1 VOL -“ button (5).
To set alarm time, select alarm 1 or 2 , with buzzer or with radio. While the digits are flashing,
1. Press “HOUR TU -” button (2) repeatedly to change the ‘hour’ setting.
2. Press “MIN TU +” button (3) repeatedly to change the ‘minute’ setting.
3. Press “AL1 VOL -“ button (5) or “AL2 VOL +” button (6) to confirm at the time and
the display will stop flashing.
To turn on alarm, press “AL1 VOL -“ button (5) or “AL2 VOL +” button (6) until desired alarm
is on. Signals (11), (12), (13), or (14) will be lit and will indicate alarm choice. Digits will stop
flashing momentarily.
When the alarm goes off, press “ON/OFF ” button (1) to turn off alarm sound. Or press
“DIMMER HI/LOW SLEEP/SNOOZE” button (4). Alarm indicators will blink during snooze
mode. Alarm will sound again after 9 minutes and alarm indicators will stop blinking.
To turn off alarm, press “AL1 VOL -“ button (5) or “AL2 VOL +” button (6) until signals (11),
(12), (13), or (14) is no longer lit. Digits will stop flashing momentarily.
RADIO OPERATIONS
General Operations
1. Press “ON/OFF ” button (1) once to turn radio on.
2. Press “ON/OFF ” button (1) once again to turn radio off.
3. Press “MIN TU +” button (3) or “HOUR TU -” button (2) once to tune the radio
stations at 0.1mHz increments.
4. Press and hold down “MIN TU +” button (3) or “HOUR TU -” button (2) for
approximately 3 seconds to automatically scan for the next radio station.
