614617
31
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
27
Getting Started Connections Basic Operations Specifi cations Troubleshooting
Effector Function Fader Start UtilityUSB
Troubleshooting
ENGLISH
Troubleshooting
n
Are all the parts connected properly?
n
Have the operations been performed properly according to the owner’s
manual?
n
Are the amplifi er and speakers operating properly?
If the unit fails to operate properly, check out the remedial action in the table below according to the
symptoms present, and see if this fi xes the problem.
Types of trouble which are not described in the table below may indicate trouble in the unit itself so consult
with your dealer from whom you purchased the unit. If your dealer does not know what action to take,
contact one of our customer service centers or your nearest repair service center.
Service centers are listed at http://www.d-mpro.com.
Symptom Cause Remedy Page
The power fails to
turn on.
The AC power cable is not connected
to the power outlet.
Connect the AC power cable to
the power outlet.
9
No sound is heard
or the volume
level is low.
One or more of the connecting cables
have not been connected properly.
• The SOURCE SEL LN1/LN2/LN3/
LN4/USB/P1–4 controls have not
been set to the correct positions.
The ducking function of the
microphone has been activated.
Check the cable connections.
• Set the SOURCE SEL LN1/LN2/
LN3/LN4/USB/P1–4 controls to
the position which corresponds
to the component now playing.
• Set the DUCKING ON/OFF
button to the OFF position.
7
10
11
The sound is
distorted.
The master output audio level is too
high.
The input level is too high.
Adjust the MASTER LEVEL
control.
Adjust the channel input LEVEL
controls.
10
10
The fader start
of the CD player
cannot be
initiated.
One or more of the connecting cables
have not been connected properly.
• The CH FADER START switch and
CROSSFADER START switch have
not been set to the ON position.
Connect the CD player to the unit
using the stereo mini jacks.
• Set the CH FADER START switch
and CROSSFADER START
switch to the ON position.
7
14, 15
n DN-X1600 does not operate normally or no sound is produced
• Are the USB cable, audio cables, etc., properly connected?
Is the volume setting for the source, audio device, application, OS, etc., properly
raised?
• Is the appropriate device selected on your audio application?
• Is the sampling frequency setting appropriate?
Either make the same settings in the DN-X1600’s preset mode and on the application.
• Are there WAV files with different sampling frequencies and bit rates?
Depending on your audio application, it may not be possible to play WAV files with
different sampling frequencies and bit rates simultaneously.
• Is other USB equipment in use?
If other USB devices are connected, try connecting only DN-X1600 to check for
problems.
Is the USB connector of the connected computer compatible with USB 2.0
(Hi-Speed)?
Use a USB 2.0-compatible cable.
n Sound is broken or distorted
• Are other applications or device drivers operating?
Close any unneeded applications.
• Are you playing multiple WAV files?
When playing multiple WAV files simultaneously, depending on the capacity of your
computer, the sound may be broken.
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denon DN-X1600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denon DN-X1600 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Denon DN-X1600

Denon DN-X1600 Gebruiksaanwijzing - Nederlands - 32 pagina's

Denon DN-X1600 Gebruiksaanwijzing - Deutsch - 32 pagina's

Denon DN-X1600 Gebruiksaanwijzing - Français - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info