614629
6
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
Connections Fader Start
ENGLISH
Specifications
Top Panel
Part Names and Functions
q
w
e
r
t
y
u
i
o
Q0
Q1 Q2 Q3 Q1 Q4 Q5 Q6
Q9
W0
W1
W2
W3
W4
W5
W6
W7W8W9E1
E0
E2
Q7
Q8
q MAIN MIC ON/OFF button
When the button is lit, Main Mic signal is
transferred to output section, otherwise Main
Mic input is muted.
w AUX MIC ON/OFF button
When the button is lit, Aux Mic signal is
transferred to output section, otherwise Aux
Mic input is muted.
e MAIN MIC LEVEL control
Adjusts the level of the Main Mic input.
r AUX MIC LEVEL control
Adjusts the level of the Aux Mic input.
t MIC EQ controls
Contour the frequency response of the Mic
input –12 dB to +12 dB.
HI
Adjusts high-tone Mic sound –12 dB to +12 dB.
At the center position, sound is flat.
MID
Adjusts mid-tone Mic sound –12 dB to +12 dB.
At the center position, sound is flat.
LOW
Adjusts low-tone Mic sound –12 dB to +12 dB.
At the center position, sound is flat.
y DUCKING ON/OFF button
Use this to switch the Talk Over function ON and
OFF. (ON/OFF is cyclic)
When the button is lit, level of signals except
Mics is attenuated.
The DUCKING attenuation level adjusts. See
below rear panel o (vpage 4).
u SPLIT CUE button
In the STEREO mode, this button feeds STEREO
Program (CUE MASTER) and Cue to both
earcups, in the SPLIT CUE (MONO) mode, the
headphone circuit provides MONO Cue to the
left ear and MONO Program (MASTER) to the
right.
In the STEREO mode, the meter indicates the
stereo level in the LEFT and RIGHT Master
Outputs. In the SPLIT CUE (MONO) mode,
mono Cue level is displayed on the Left meter
and mono Program (CUE MASTER) level is
displayed on the Right meter.
In the SPLIT CUE (MONO) mode, the button is
lit.
i HEADPHONE PAN control
Serves two purposes∙∙∙ In the STEREO mode
it changes the relative levels of the Cue and
Program mixed together in both ear cups. In the
MONO mode it changes the balance between
the Mono Cue in the left ear cup and the Mono
Program in the right.
o HEADPHONE level control
Adjusts the volume for the headphones.
Q0 HEADPHONE output jack
Accepts 1/4” stereo headphone plugs.
Q1 CROSSFADER START A, B switches
Use this to switch the Crossfader Start function
ON and OFF.
Q2 CROSSFADER
Controls the relative output level from the
summed A and B Mixes. When the fader is
at its far left, only the A Mix is heard from the
Outputs. As the fader is moved toward the
right, the amount of B Mix is increased and the
amount of A Mix is decreased. When the fader
is centered, equal amounts of A and B Mixes are
routed to the Outputs. Fully right is all B Mix at
the Outputs.
LINE 2, 4, 6, 8 FADER output terminals
(Rear Panel i (vpage 4))
ø 3.5 mm stereo mini terminal
Others should not be affected a terminal short-
circuit.
Q3 Source input fader (Ch. fader)
Controls the level of the selected Input.
Q4 CROSSFADER ASSIGN switches
A, B:
The channel source is assigned to A or B of the
Crossfader.
THRU:
Select when you dont assign the channel source
into the Crossfader.
Getting Started
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denon DN-X1100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denon DN-X1100 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info