524177
10
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-8000, GT-FSI-05 / GT-FSI-05d
18
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-8000, GT-FSI-05 / GT-FSI-05d
19
Directly to the remote socket without
dimmer
If you press the button the remote socket briefly, the plugged-in
consumer will be switched on/off.
With the
button, you can allocate the remote socket to a
new channel at any time, see "Allocating the channels to the remote
sockets".
Directly to the remote socket with dimmer
If you press the button the remote socket briefly, the plugged-in
consumer will be switched on/off.
If you keep the button
the remote socket pressed, the dim-
mer will slowly start to darken the lamps, until the go out, and
subsequently brightens them, until there are fully lit. It repeats this
process, until you release the switch.
If you release the switch and then press it in again, the dimmer will
control the brightness in the other direction.
With the
button, you can allocate the remote socket to a
new channel, see "Allocating the channels to the remote sockets".
Operation
About the remote control (GT-8000)
Switching on and off
To switch a consumer on/off, press the relevant
/ button of the
channel (1, 2, 3 or 4, depending on the allocation).
With the
button, all channels are switched on. With the
button, all channels are switched off.
Dimming lights
In order to use the dimming function, the relevant channel needs to
be activated for the remote socket with dimmer. A channel is always
activated when the relevant
- or button has been pressed on
the remote control.
Now, press the
button, in order to reduce the brightness
increase the brightness.
If you activate all channels with the
- or switch, both
dimmers are controlled simultaneously using the
bzw.
buttons.
If you place both remote sockets with dimmer on the same channel,
both dimmers can only be controlled at the same time.
Note:
After a power failure, a malfunction of the memory for the system
code and the channel of the remote socket could take place in rare
cases. In this case, disconnect the remote socket from the mains for
at least 6 hours and then carry out the allocation procedure again.
Operation
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Delta GT-FSI-05 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Delta GT-FSI-05 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info