555785
5
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
5
GB
Power Inverter
SAFETY INSTRUCTIONS
To ensure reliable service your power inverter must be
installed and used properly.
Read and understand the installation and operating
thoroughly prior to installation and use. Pay particular
attention to the WARNING and CAUTION statements
in this manual.
CAUTION statements advise against certain condi-
tions and practices that may result in damage to your
inverter.
WARNING statements identify the conditions or prac-
tices that may result in injury or death.
PLEASE READ ALL THE INSTRUCTIONS BEFORE
USING THIS POWER INVERTER.
WARNING:
To reduce this risk of re, electric shock, explosion or
injury:
Do not connect to AC distribution wiring.
Always disconnect appliances from the inverter and
turn the inverter off before working the appliance.
Multiple outlet power strips with switches and power
switches and circuit breakers only interrupt power
to the “live” socket terminals. The neutral terminals
remain powered with respect to the earth terminals.
Do not make any electrical connections or discon-
nections in areas designated as IGNITION PRO-
TECTED including DC cigarette lighter type plug
connections and ring terminal connections. Always
disconnect appliance from the inverter before re-
moving the inverter power source.
Do not obstruct or block the air vents on the invert-
er.
The inverter is not a toy, keeps away from children.
CAUTION:
Do not use with positive earth electrical systems (the
majority of modern vehicles are negative earth). A
reverse polarity connection will result in a blown fuse
and may cause permanent damage to the inverter.
The inverter will not operate high wattage applianc-
es or equipment that produces heat, such as dryers,
microwave ovens and toasters.
Earthing the neutral will cause the inverter to shut
down.
Do not operate the inverter if it is wet. Water and
electric do not mix.
Do not install the inverter in the engine compart-
ment, the inverter must be used in a well ventilated
position.
This inverter is not tested for use with medical equip-
ment.
IMPORTANT CABLE INFORMATION
Substantial power loss and reduced battery operating
time result from inverters installed with cables that are
not able to supply full power. Symptoms of low battery
power can result from cables that are either excessively
long or of an insuf cient gauge. Marine installations are
subjected to vibration and stresses that exceed those
of other mobile installations, therefore the installer/op-
erator should be especially aware of the requirements
to maintain secure, tight water resistant electrical con-
nections and provide for strain relief for DC cables and
appliance wiring. Cable insulation must be the appro-
priate type for the environment.
INTRODUCTION
The inverter supplies continuous power in the form of
one household type socket. The inverter has enough
power to run almost any household or electronic appli-
ance. Safety features include automatic shut down and
a low battery alarm to prevent damage to your battery.
CONTROLS, INDICATORS AND CONNEC-
TORS
The front panel of the inverter provides two LED indica-
tors. The green LED indicator shows the unit is working
correctly when lit. The red LED indicator shows inverter
shut down from overload, over voltage or over temper-
ature. The inverter is tted with an on/off switch, the on/
off switch is also used to force reset the inverter circuits
in case of overload, over voltage or over temperature.
Power is supplied through the three pin AC plug and
DC input power is supplied via the rear panel.
HOW INVERTERS WORK
Principle of operation
The inverter converts low voltage DC (direct current)
from a battery or other power source to standard AC
(alternating current) household power. The inverter
converts power in two stages. The rst stage is a DC to
DC conversion process that raises low voltage DC from
the inverter input to high volt DC. The second stage is
the actual inverter stage that converts the high DC into
AC power.
The DC to DC converter stage uses modern high
frequency power conversion techniques that have re-
placed bulky transformers found in less technologically
advanced models. The inverter uses advanced MOS-
FET transistors in a full bridge con guration, which
ensures excellent overload capabilities and allows the
inverter to operate reactive loads such as small induc-
tion motors.
The output waveform
The AC output waveform is known as a “modi ed sine
wave”. It is a waveform that has characteristics similar
to the sine wave shape of standard household power.
This type of switching power is suitable for most AC
load, including linear and switching power supplies
used in electronic equipment, transformers and mo-
tors.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Defort DCI-150 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Defort DCI-150 in de taal/talen: Nederlands, Duits, Engels, Frans, Deens als bijlage per email.

De handleiding is 0,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info