790840
5
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
5
Do not remove or deface warning labels. Removing
labels increases the risk of exposure to radiation.
Position the laser securely on a level surface. Damage
to the laser or serious injury could result if the laser falls
Laser Information
The DCE088R and DCE088G Laser Levels are Class 2
laser products.
The DCE088R and DCE088G lasers are self-leveling
laser tools that can be used inside and outside for
horizontal (level), vertical and plumb alignment projects.
WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious personal injury.
Work Area
Keep your work area clean and well lit. Cluttered benches
and dark areas invite accidents.
Do not operate laser tools in explosive atmospheres, such
as in the presence of ammable liquids, gases, or dust.
Keep bystanders, children, and visitors away while operating
a laser tool. Distractions can cause you to lose control
Electrical Safety
Use battery operated tool only with the specically
designed batteries. Use of any other batteries may create
a risk of re.
Product Overview
WARNING:
Never modify the tool or any part of it. Damage to the
laser or personal injury could result.
Figure 3 - Battery Interface A
Figure 2 - Pendulum Lock B
Figure 2 - Keypad C
Figure 5B - ON/OFF button: horizontal laser line D
Figure 5B - ON/OFF button: vertical laser line E
Figure 5B - Battery Meter F
Figure 3 - Magnetic pivot bracket G
Figure 3 - Keyhole slot H
Figure 5A - Tripod thread tting (1/4 - 20” & 5/8-11) I
Figure 5A - Ceiling Mount J
Figure 5A - Clamp K
Figure 5A - Screw Hole M
Batteries and Power
This tool is powered by the following DeWALT 10.8V Battery
packs: DCB120, DCB127 or may also be powered using the
DEWALT AA Starter pack which can carry 4 x AA batteries.
Note: The AA starter pack is recommended only for use with
the red laser
Battery Installation / Removal
(See gure 3)
Using the AA Starter Pack:
CAUTION:
The AA starter pack is designed specically for
use only with the DeWALT 10.8V compatible laser
products and cannot be used with any other tools Do
not attempt to modify the product.
To install batteries:
Lift up the battery compartment cover as shown in Figure
4.
Insert four fresh AA batteries in the compartment, placing
the batteries according to (+) and (–) on the inside of the
compartment.
Install the AA starter Battery pack as shown in Figure 3.
Using the 10.8V DEWALT Rechargeable
Pack:
Install the 10.8V Battery pack as shown in
Figure 3.
WARNING:
Batteries can explode, or leak, and can cause
injury or re. To reduce this risk carefully follow all
Carefully follow all instructions and warnings on the battery
instructions on the label and package and accompanying
Battery Safety Leaet.
Always insert batteries correctly with regard to polarity
(+ and –), marked on the battery and the equipment.
Do not short battery terminals.
Do not charge disposable batteries.
Do not mix old and new batteries. Replace all of them at the
same time with new batteries of the same brand and type.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt DCE088R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt DCE088R in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info