• Press the ON/OFF switch (4) to start the ap
pliance (Fig. F).
• Once the selected quantity has been milled,
the appliance will stop automatically.
• If you want to stop the appliance before mil-
ling is complete, press ON/OFF switch (4).
• Remove the ground coffee container, tap the
receptacle gently, remove the lid and pour the
ground coffee into filter of the coffee maker.
• To obtain additional ground coffee, repeat the
operating cycle.
Always first make sure that the ground coffee
does not go above the “max.” level of the
ground coffee container (6).
Selected settings will be retained from one use
to the next.
IMPORTANT!
For your appliance run correctly, make certain
that:
- the lid to the coffee-bean hopper (2) is cor-
rectly positioned.
- The ground coffee container (6) and its lid
(7) are correctly placed in the body of the ap-
pliance.
TIPS
- It is best to store coffee beans in a cool, dry
place. Beans should be kept in an opaque,
airtight container.
- Grind the coffee just prior to brewing it.
Advice to select the level of coarseness of your
ground coffee.
- Use the coarseness selector knob (Fig. E) to
adjust the grind according to the type of cof-
fee maker.
- Generally, the quicker the water goes through
the ground coffee, the finer the ground coffee
should be.
A “medium” ground is thus suited to making
filter coffee while a “very fine” ground is nee-
ded to make an Espresso.
- For the first use, we suggest that you use an
intermediate position and then adjust the set-
ting to your taste.
Once you have used the appliance a few
times, you will find the ideal grind setting to
suit your taste and brewing method.
-Do not change the grind setting while the
applince is running.
Suggest Grind Settings:
Advice to select the number of cups
- Use the cup selector knob (Fig. D) to pro-
gram the quantity of ground coffee you
want.
- The mill grinds approx. 1 tablespoon of cof-
fee per cup selected.
MAINTENANCE
- To keep all your coffee’s aroma and to avoid
a degradation of the ground coffee, empty
the ground coffee holder after each use.
- Always disconnect the grinder before clea-
ning.
- Never place the grinder, power supply cord
or plug in water or under running water.
- Do not use strong detergents or abrasive
pads to clean the appliance.
- Clean the lids and the ground coffee contai-
ner in warm, soapy water.
- To remove the upper burr (5), set the coar-
seness selector knob (Fig. E) to the fine po-
sition then take hold of the top of the burr of
the upper mill with your fingers and turn
clockwise, then pull it vertically to remove.
- Carefully clean the inside of the coffee-bean
hopper (1) with a damp cloth.
- To replace the upper burr, set the coarseness
selector knob (Fig. E) to the coarse position,
insert the burr and turn it once in the coun-
ter-clockwise direction.
- Carefully clean the ground coffee dispenser
10
GRIND
Fine
Medium/Fine
Medium
Medium/Coarse
Coarse
Espresso
AutoDrip/Permanent Filter
AutoDrip/Permanent Filter
Percolator
French Press
TYPE OF COFFEE MAKER
