723485
22
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
20
Make sure there are no milk residues left
inside the holes and the groove on the fine
end of the froth regulator.
5. Check that the intake tube and spout are not
clogged with milk residues.
6. Replace the froth regulator, milk spout and
intake tube.
7. Replace the lid on the milk container, turning
it anticlockwise to hook it in place.
DESCALING
Descale the machine when the message
“DESCALE!” flashes on the display.
Important!
Descaler contains acids which may irritate the
skin and eyes.
It is vital to respect the manufacturer’s safety
warnings given on the descaler pack and the
warnings relating to the procedure to follow in
the event of contact with the skin and eyes.
Please note!
Under no circumstances should you use
sulphamic or acetic based descalers. Their use
invalidates the guarantee.
Failure to descale the appliance as described also
invalidates the guarantee.
1. Turn the machine on.
2. Enter the programming menu by pressing
the P icon.
3. Select by pressing the OK icon.
“Descaling Confirm?” is displayed. Press OK
to enable the function.
4. The message “Add descaler” “Press OK” is
displayed.
5. Before confirming, empty the water tank
(A13).
Pour the descaler diluted with water
(respecting the proportions indicated on the
descaler pack) into the water tank.
Place an empty container with a minimum
capacity of 1.5 litres under the hot water
spout.
Important! Danger of burns
Hot water containing acid flows out of the hot
water spout.
Avoid contact with splashes of water.
6. Confirm by pressing the OK icon.
7. The message “Descaling...” is displayed.
The descaling programme starts and the
descaler liquid comes out of the water spout.
The descale programme automatically
performs a series of rinses and pauses to
remove limescale deposits from inside the
machine.
After about 30 minutes, the message “Rinsing
FILL TANK!” is displayed.
8. The appliance is now ready for rinsing
through with clean water.
Remove the water tank, empty, rinse under
running water, fill with clean water and
replace. “Rinsing... Press OK” is displayed.
9. Empty the container used to collect the
descaler solution and replace it under the hot
water spout.
10. Press the OK icon to start rinsing. Hot water
flows out of the spout and the message
“Rinsing...” is displayed.
11. When the water tank is completely empty,
the message “Rinsing Complete... Press OK”
is displayed.
12. Press the OK icon. The appliance goes off.
To use it again, turn the appliance on by pressing
the
button.
SETTING WATER HARDNESS
The DESCALE message is displayed after a
period of time established according to water
hardness.
The machine is set by default for a hardness
value of 4 (very hard water).
The machine can also be programmed according
to the actual hardness of the mains water in
the various regions, varying the frequency with
which the message is displayed.
Measuring water hardness
1. Remove the “TOTAL HARDNESS TEST”
indicator paper from its pack.
2. Immerse the paper completely in a glass of
water for one second.
3. Remove the paper from the water and shake
lightly. After about a minute, 1, 2, 3, or 4 red
squares form, depending on the hardness of
the water. Each square corresponds to one
level.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeLonghi Esam 6720 - Primadonna Avant bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeLonghi Esam 6720 - Primadonna Avant in de taal/talen: Engels als bijlage per email.

De handleiding is 2,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van DeLonghi Esam 6720 - Primadonna Avant

DeLonghi Esam 6720 - Primadonna Avant Gebruiksaanwijzing - Nederlands - 19 pagina's

DeLonghi Esam 6720 - Primadonna Avant Gebruiksaanwijzing - Deutsch - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info