770016
4
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
9
if provided, the appliance performs a rinse cycle then goes
o (stand-by).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
rst turn the appliance o by pressing the button;
press the main switch (A6) to the “0” position.
Important!
Never press the main switch while the appliance is on.
6. SETTING WATER HARDNESS
For instructions on setting water hardness, see section “18. Set-
ting water hardness”
7. AUTOOFF
The time can be changed so that the appliance switches o after
being idle for 15 or 30 minutes, or after 1, 2 or 3 hours.
To change the Auto-o setting, proceed as follows:
1. With the appliance o (standby) and the main switch (A6)
in the I position (g. 1), press and hold the /
button (B9) until the lights (B1) on the control panel come
on;
2. Select the required time interval by pressing the but-
ton (B2):
15 min
30 min
1 hour
2 hours
3 hours
3. Press the / button (B9) to conrm. The lights
go o.
The auto-o time is now programmed.
8. ENERGY SAVING
Use this function to enable or disable energy saving. When ena-
bled, this mode reduces energy consumption in compliance with
current European regulations.
1. With the appliance o (standby) and the main switch (A6)
pressed (g. 1), press and hold the button (B4) until
the light on the control panel comes on;
2. To disable the function, press the button (B2). The
light ashes;
3. To enable the function again, press the button (B2)
again: the light comes on;
4. Press the / button (B9) to conrm. The light
goes o.
The energy saving setting is now programmed.
Please note!
When in energy saving mode, a few seconds may elapse before
the rst coee is delivered as the appliance must heat up
again.
9. SETTING THE TEMPERATURE
To change the temperature of the water used to make the cof-
fee, proceed as follows:
1. With the appliance o (standby) and the main switch (A6)
in the I position (g. 1), press and hold the button
(B2) until the lights on the control panel come on;
2. Press the button to select the required temperature:
LOW HIGH
3. Press the / button (B9) to conrm the selec-
tion. The lights go out.
10. WATER SOFTENER FILTER
Certain models are tted with a water softener lter (C4). If this
is not the case with your model, you are recommended to pur-
chase one from De’Longhi Customer Services.
To use the lter correctly, follow the instructions below.
10.1 Installing the lter
1. Turn the appliance on and wait until it is ready for use.
2. Remove the lter (C4) from the packaging. The date indica-
tor disk varies according to the lter provided (g. 8);
3. Turn the date disk to display the next 2 months of use.
Please note
The lter lasts about two months if the appliance is used nor-
mally. If the coee machine is left unused with the lter in-
stalled, it will last no longer than 3 weeks.
4. To activate the lter, run tap water through the hole in
the lter as shown in gure 9 until water comes out of the
openings at the side for more than a minute;
5. Extract the tank (A7) from the appliance and ll with
water;
6. Insert the lter in the water tank and immerse it complete-
ly for about ten seconds, sloping it and pressing it lightly to
enable the air bubbles to escape (g. 10).
7. Insert the lter in the lter housing and press as far as it
will go (g. 11);
4

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

DeLonghi-ECAM250.33-Magnifica-S-Smart

Zoeken resetten

  • Wij hebben ons toestel ongeveer 1 maand. Tot nu ging alles perfect. Nu komt er geen water meer uit. Heb alles gereinigd volgens het boekje. Bij het aanzetten van het toestel gaat alles normaal en komt erwater uit.
    Maar als ik koffie wil, met gemalen koffie, doet het toestel niks. Wat kan ik nog doen? Gesteld op 16-2-2024 om 17:59

    Reageer op deze vraag Misbruik melden
  • vanochtend maakte onze machine tijdens het spoelen een vreemd geluid bij de eerste spoelbeurt. Ook tijdens de koffie uitgifte en warm water tappen leek het alsof de pomp er moeite mee had. Heel onregelmatige straal en bij water tappen zelfs stoom...

    Na wat speurwerk op dit forum uitgevonden dat de pomp vaker een probleem is en dat daar een terugslag klep/ balletje wel eens blijft hangen door vervuiling.

    Heb zojuist de pomp gedemonteerd en uit elkaar gehaald. geen vervuiling. we hebben ook kalkvrij water.
    Ik heb vervolgens de eerste waterslang naar het systeem losgehaald en toen water gevraagd, de pomp loopt dan probleemloos en constant.

    Wat ook nog opvalt is dat het water wat uit de machine komt veel warmer is dan normaal.

    Is er iemand hier die mij verder kan helpen?

    Met vriendelijke groet Martin Gesteld op 10-9-2022 om 21:30

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeLonghi ECAM250.33 Magnifica S Smart bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeLonghi ECAM250.33 Magnifica S Smart in de taal/talen: Engels als bijlage per email.

De handleiding is 5.92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van DeLonghi ECAM250.33 Magnifica S Smart

DeLonghi ECAM250.33 Magnifica S Smart Gebruiksaanwijzing - Nederlands - 15 pagina's

DeLonghi ECAM250.33 Magnifica S Smart Gebruiksaanwijzing - Deutsch - 15 pagina's

DeLonghi ECAM250.33 Magnifica S Smart Gebruiksaanwijzing - Français - 15 pagina's

DeLonghi ECAM250.33 Magnifica S Smart Gebruiksaanwijzing - Italiano - 15 pagina's

DeLonghi ECAM250.33 Magnifica S Smart Gebruiksaanwijzing - Espanõl - 15 pagina's

DeLonghi ECAM250.33 Magnifica S Smart Aanvulling / aanpassing - Alle talen - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info