Description of the control panel
"ON/Standby" button
Turns the appliance on and off.
"Fan" button
Selects fan speed (MIN/MAX)
Thermometer button
Temporarily displays the room temperature mea-
sured by the appliance.
Press once to display the temperature in °F. Press
twice, to display °C. After a few seconds, the level
of humidity measured in the room is displayed
again.
N.B.: the measurements displayed are indicative
only.
Increase/decrease buttons
Set the percentage of humidity required in the
room, increasing or reducing it in steps of 5%.
These buttons are also used to set the timer. From
0 - 10 the time varies in steps of 30 minutes, from
10 - 24 in steps of an hour.
Pump button
(certain models only)
When the pump button is pressed, the message
PUMP is displayed.
If PUMP flashes, the pump is not functioning cor-
rectly.
Timer button
Sets the timer to delay when the machine comes
on or goes off.
Display
Meaning of the codes or symbols which may be
displayed:
-- -- Indicates that the appliance is in standby
mode.
Tank alarm
If this symbol flashes, the tank is full, absent or
incorrectly positioned.
The alarm continues until the tank is correctly
positioned.
Defrost alarm
With an ambient temperature of less than 15°C,
(59°F) the appliance performs frequent defrosting
cycles. While the appliance is defrosting, this
symbol comes on and remains on until defrosting
is completed. It also comes on when the applian-
ce pauses for about 3 minutes after start-up.
