535602
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Lynx™ Single Slot Dock
NOTE
Read this manual carefully before performing any type of
connection from the terminal to a host PC using the
Single Slot Dock.
The user is responsible for any damages caused by
incorrect use of the equipment or by inobservance of the
indication supplied in this manual.
NOTE
Do not attempt to disassemble the Single Slot Dock, as it
does not contain parts that can be repaired by the user.
Any tampering will invalidate the warranty.
The Single Slot Dock paired with a Lynx PDA builds a reading system for
the collection, decoding and transmission of barcoded data.
The Single Slot Dock is both a USB and a serial communication adapter
between the terminal and the host computer.
The Single Slot Dock also functions as a battery charger, both for the
terminal and the spare battery pack (standard 94ACC0064 and high
capacity 94ACC0065). The spare battery can be charged by inserting it
into the slot at the back of the cradle.
Power supply is required for the Lynx to be connected to the cradle and
for battery recharging operations.
Figure 1 –Single Slot Dock General View
Key:
A) Contacts for Lynx
B) Power on LED
C) Battery charge status LED
D) RS232 connector
E) USB connector
F) Power supply connector
G) Spare battery slot
822001281 (Rev. A)
PDA INSERTION/ REMOVAL
For correct insertion into the cradle, insert the PDA from the top of the
cradle and push it down.
Figure 2 - PDA Insertion
To remove the PDA from the cradle, simply pull it upwards while holding
the cradle firmly down.
Power Supply
Each dock requires a power supply to be connected to mobile computers.
We recommend the power supply already included in the box.
-
+
Figure 3 - Power Supply Polarity
LED INDICATORS
Power LED Status Indicator
Color Status
Green Cradle powered
Battery Charging LED Status Indicators
Color Status
Off Battery absent
Red Battery charge in progress
Green Charge completed
Red Blinking Error
USING THE SPARE BATTERY CHARGER
Insert the battery, contacts side first, into the slot and press it until the
battery latch is automatically closed; charging starts automatically.
Figure 4
To remove the battery, press the battery-release lever.
Figure 5
FASTENING THE DOCK TO A SURFACE
To securely fasten the Single Slot Dock to tables, desks and other
surfaces, and to prevent the dock from moving when you remove the
device, use the four velcro dual lock feet provided with the matching dual-
lock adhesive pads.
Figure 6
Remove the protective feet from the dock before attaching the velcro dual
lock feet.
A
C
B
F
G
D
E
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Datalogic Lynx Single Slot Dock bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Datalogic Lynx Single Slot Dock in de taal/talen: Engels als bijlage per email.

De handleiding is 0,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info