562732
7
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
7
UK DE JP CN
3.2 DALI EPICON 2
The speaker can be positioned on a stand or shelf. The enclosed rubber bumpers can be
mounted under the speaker for stable and vibration free positioning, see Figure 6.
EPICON 2 should be positioned minimum 25 cm (10”) from the rear wall.
3.3 DALI EPICON VOKAL
EPICON VOKAL is the dedicated centre channel and has been specially designed to be positioned
close to the large surface of the TV screen. You can place it above or below the screen, on a
stand or on a shelf. We recommend fitting the enclosed feet to ensure a stable, vibration-free
setup (see Figure 9). EPICON VOKAL can be positioned close to the wall.
4.0 CONNECTION
Correct, tight connections to your amplifier are extremely important for your listening experience.
Always use cables of the same type and length for left and right channels. We recommend using
special speaker cables from DALI, available from your dealer.
Connection in correct phase is a detail that is often ignored. The red (+) terminal of the amplifier
must be connected to the red (+) terminal of the loudspeaker. The black (-) terminal of the
amplifier must be connected to the black (-) terminal of the loudspeaker (see figure 7D). Even
a single loudspeaker connected out-of-phase in a stereo or surround installation will make the
bass weaker and the stereo image unfocused.
For the optimal listening experience, the right loudspeaker (as seen from the listening position)
must be connected to the amplifier output terminals marked “R” or “Right”. The left loudspeaker
must be connected to the amplifier output terminals marked “L or “Left”.
NOTE: Before connecting cables, connect the two pairs of terminals with the included terminal
links (see Figure 7A+7B+7C)
NOTE: Before connecting cables or changing any connections, ALWAYS turn off your amplifier.
NOTE: Make sure that the bare conductors are tightly gripped by the terminals with no loose
wires which could cause a short circuit and damage the amplifier (see figure 8).
NOTE: If you are using DALI EPICON speakers in a surround system, follow the instructions
included with your surround amplifier.
4.1 SINGLE-WIRING vs. BI-WIRING/BI-AMPING
Your speakers can be connected by means of a single speaker cable set, when connecting the
two pairs of terminals with the included terminal links (see figure 7D).
However, DALI EPICON speakers are fitted with two pairs of terminals, allowing you the option of
running two sets of cables to each speaker. The top terminal pair is internally connected to the
crossover network’s high frequency section. The bottom terminal pair is internally connected to
the crossover network’s bass section.
NOTE: When bi-wiring or bi-amping, ALWAYS remove the metal links between the terminals
before connecting cables.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dali EPICON bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dali EPICON in de taal/talen: Engels als bijlage per email.

De handleiding is 3,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Dali EPICON

Dali EPICON Gebruiksaanwijzing - Deutsch, Français - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info