594201
32
Verklein
Vergroot
Pagina terug
1/71
Pagina verder
©2015 DJI. All Rights Reserved. 32 |
7.
8.
9.
10.
11.
Wait until the LED flight indicator starts to slowly blink green/yellow. This means the aircraft is initializing
and entering the Ready to Fly/Ready to Fly (non-GPS) state. Then proceed to execute the CSC
command to start motors.
Push the throttle stick up slowly to lift the aircraft off the ground. Refer to the Remote Controller
Operation (Page 10) for more details.
Enjoy your flight while capturing and recording with the DJI VISION App. Refer to the Using DJI VISION
App (Page 42) for more details.
Pull down the throttle stick to descend. The stick will lock into place and the aircraft will descend steadily.
After landing the aircraft on the ground, keep the throttle stick at its lowest position for about 3 to 5
seconds which will automatically stop the motors.
You SHOULD NOT execute the CSC during normal flight! This will stop the motors and cause the
aircraft to descend rapidly and drop without any type of control.
(1)
(2)
(3)
(4)
When the LED flight indicator blinks yellow rapidly during flight, the aircraft has entered into
Failsafe mode, refer to the Failsafe Function (Page 32) for details.
A low battery capacity warning is indicated by the LED flight indicator blinking red slowly or
rapidly during flight. Refer to the Low Battery Level Warning Function (Page 34) for details.
Watch the quick start video about flight for more flight information.
Aircraft and battery performance is subject to environmental factors such as air density and
temperature. Be very careful when flying 3000 meters (9800 feet) or more above sea level, as
battery and aircraft performance may be reduced.
11.4 Failsafe Function
The aircraft will enter Failsafe mode when the connection from the remote controller is lost. The flight control
system will automatically control the aircraft to return to home and land to reduce injuries or damage. The
following situations would make the aircraft fail to receive a signal from the remote controller and enter Failsafe
mode:
(1) The remote controller is powered off.
(2) The aircraft has flown out of the effective communication range of the remote controller.
(3) There is an obstacle obstructing the signal between the remote controller and the aircraft, essentially
reducing the distance the signal can travel.
(4) There is interference causing a signal problem with the remote controller.
Failsafe works differently depending on the mode the aircraft is in when Failsafe mode is initiated whether it is in
the Ready to Fly or Ready to Fly (non-GPS) mode.
Ready to Fly (non-GPS) ---- Automatic landing
The flight control system will try to keep the aircraft level during descent and landing. Note that the aircraft may
be drifting during descent and landing process.
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DJI Phantom 2 Vision bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DJI Phantom 2 Vision in de taal/talen: Engels als bijlage per email.

De handleiding is 5,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van DJI Phantom 2 Vision

DJI Phantom 2 Vision Gebruiksaanwijzing - Deutsch - 63 pagina's

DJI Phantom 2 Vision Gebruiksaanwijzing - Français - 61 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info