611981
8
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
Downloading Your VideosRemote Controller Status Indicator
Appendix
Return-to-Home (RC)
OR
In the DJI GO App:
11. Flight
www.dji.com/product/inspire-1-pro-and-raw
Download the detailed user manual at:
©2015 DJI. All Rights Reserved.
Designed by DJI. Printed in China.
slowly
. . .
Safe to fly (GPS working).
RC normal but not connected to aircraft.
RC normal and connected to aircraft.
RC Slave Mode and connected to aircraft.
RC Slave Mode and not connected to aircraft.
Manual Takeoff Manual Landing
Left stick down (slowly)
until you touch the ground.
Hold a few seconds to
stop the motors.
The aircraft will not avoid obstacles while it is returning to the
Home Point, and an appropriate RTH altitude must be set before
takeoff. You should also use the control sticks to guide the aircraft.
Refer to the Safety Guidelines and Disclaimer for more details.
If you want to lower the landing gear
but the switch is already in the
'down' position, toggle the switch
up and down again.
LowerRaise
Rotating propellers can be dangerous. DO NOT start the motors in narrow spaces or when there are people nearby.
Never perform the Combination Stick Command in mid-flight, or else the aircraft will crash.
Always keep your hands on the remote controller so long as the motor is still spinning.
After landing, power off the aircraft before turning off the remote controller.
Take off from a flat surface in a wide open space, with the rear of the aircraft facing towards you.
Same as the RTH button in the DJI GO app.
Brings the aircraft back to the Home Point.
Press and hold to initiate the RTH procedure.
Press again to cancel.
9. Preparing for Takeoff
Balancing Ring or Filter
Lens Hood
Rotate the Gimbal
Lock to the
unlocked position.
Toggle the Flight Mode
Switch to the safest P-Mode.
Connect your mobile
device.
Power on the remote
controller and aircraft.
Launch the DJI GO app
and enter Camera View.
Calibrate the compass.
Tap the Aircraft Status Bar at
the top, select 'Calibrate'
and follow the on-screen
instructions.
Align the key on the
damping plate with the
slot on the gimbal.
Align the white lines
and insert the gimbal.
Rotate the Gimbal
Lock to the locked
position.
4
2
Be sure to remove the gimbal before transforming the aircraft to Travel Mode.
Always power off the aircraft before mounting or removing the gimbal.
Key
DJI GO
App
Pair the propellers and
motors with arrows of the
same color (red or white).
Attach the
propeller onto the
motor.
2
Ensure the propellers are mounted securely and correctly.
3
1
1
Rotate the
propeller lock until
the arrows are
aligned and you
hear a click.
3
Again, rotate the
propeller lock until
you hear a click.
Always set the camera lens to AF mode.
While holding down the lens release button, rotate the camera lens counterclockwise to detach it.
DO NOT mount the Balancing Ring and a filter at the same time.
7. Prepare the Camera
DO NOT use other 2.4 GHz devices at the same time to avoid signal interference.
DO NOT operate more than 3 aircrafts within in the same area (size equivalent to a soccer field) to prevent transmission interference.
Try to keep the aircraft inside the optimal
transmission range. If the signal is weak,
adjust the antennas or fly the aircraft
closer.
Strong Weak
Unfold the mobile device holder and the antennas.
6. Prepare the Remote Controller
Rotate the Lens Lock counterclockwise to
lock it.
Tighten the junction between the lens and camera body.
Hold down the lens release button to loosen the junction
when attaching and detaching the camera.
Mount the Balancing
Ring (or a filter) and
the lens hood. Insert
the Micro SD card.
3
4
Micro SD
click
2
1
Unfold
Optimal Transmission Range
1
3
2
In Dual Remote Controller Mode, only the Master remote controller can transform the landing gear.
DO NOT place the aircraft on rough or sound-absorbing surfaces (e.g. carpets) when transforming the landing gear.
Transform the aircraft to
Landing Mode
Toggle the transformation
switch up and down at least
four times
Power on the remote controller
and the aircraft
Insert the battery
5. Prepare the Aircraft
4
X
Power Outlet
100-240V
The Intelligent Flight Battery must be fully charged before using it for the first time.
Only use the official DJI Inspire 1 Pro charger for your Intelligent Flight Battery and remote controller. Power off the Intelligent Flight Battery
before charging.
When charging is complete, the LED lights on the Intelligent Flight Battery and remote controller will turn off.
Charge Time:
~1 hour 18 minutes*Remove the battery
Charge Time:
~2.5 hours*
A
A
B
B
DJI GO supports iOS 8.0 (or later) or Android 4.1.2 (or later).
Creativity Unleashed
www.dji.com
INSPIRE 1
PRO
Tutorial Videos
Watch the tutorial
videos at
www.dji.com or in
the DJI GO app.
2. Watch the Tutorial Videos
1. Download the DJI GO
App
Search ‘DJI GO’ on the App Store
or Google Play and download the
app to your mobile device.
DJI GO app
3. Check the Battery Levels
High
Low
Low
High
Press once to check
the battery level.
Press once, again
and hold to turn
on/off.
U
P
D
o
w
n
T
u
r
n
R
i
g
h
t
T
u
r
n
L
e
f
t
F
o
r
w
a
r
d
B
a
c
k
w
a
r
d
R
i
g
h
t
L
e
f
t
Left Stick
Right Stick
Using INSPIRE 1 PRO
You can change the stick mode in the DJI GO app.
8. Mount the
Gimbal and Camera
10. Controls
The stick mode is set to Mode 2 by default (left hand throttle). The left stick controls the aircraft's elevation and heading.
The right stick controls the aircraft's forward, backward and lateral movements. The gimbal dial controls camera tilt.
Aircraft Status Indicator
slowly
. . .
P-ATTI or ATTI mode.
slowly
. . .
Low battery level warning.
quickly
.....
Critical low battery level warning.
solid —— Critical error.
. . .
No GPS but VPS working.
Compressed video and photo files
are automatically stored on your
mobile device while you are
recording. You can view them in the
Library section of the DJI GO app.
For the best quality, download the
original HD files through the app or
using an SD card reader.
Gimbal Dial
* Provided charger
Place your mobile
device and adjust the
clamp to secure.
Press the button to
release the clamp.
Rotate the lens
clockwise until
you hear a click.
Align the two lens mount
indices, and insert the lens
into the camera body.
Connect your mobile
device with a USB
cable.
Safe to Fly (GPS)
Before taking off, ensure the Aircraft Status Bar in the DJI GO app
indicates ‘Safe to Fly (GPS)’.
Auto Takeoff
The aircraft will take off and hover at
an altitude of 4 feet (1.2 meters).
Return-to-Home
Brings the aircraft back to the Home
Point. Tap again to stop the procedure.
Auto Landing
The aircraft will land vertically and stop its
motors.
Combination Stick Command
to start/stop the motors
Left stick up (slowly)
to take off
Ensure the landing gear is lowered
before landing.
quickly
.....
Not connected to remote controller.
. . .
compass calibration required.
Slot
Dual Remote Controllers
You will need to link the Master and Slave
remote controllers.
On the Master RC, launch the DJI GO
app and enter Camera View. Tap on
the top of your screen to bring up the RC
Settings. Set the RC Status as ‘Master’,
and then enter the desired connection
password.
Similarly on the Slave RC, set the RC
Status to ‘Slave’. Then tap Search for
Master RC and connect to the Master RC
with your preset password.
4. Charge the Batteries
This content is subject to
change without prior notice.
(
B
...
) Low battery warning / RC error.
(
B—B—
...
) RC idle for 5 minutes.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DJI INSPIRE 1 PRO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DJI INSPIRE 1 PRO in de taal/talen: Engels als bijlage per email.

De handleiding is 13,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van DJI INSPIRE 1 PRO

DJI INSPIRE 1 PRO Gebruiksaanwijzing - English - 70 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info