611981
67
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
©
2015 DJI. All Rights Reserved.
67
INSPIRE 1 PRO
User Manual
SD card slot on the camera.
Step 3- Update the Aircraft
1. Ensure the remote controller is powered off and then power on the aircraft. Upgrade will begin
automatically after aircraft is powered on.
2. It will take approximately 25 minutes to complete the rmware update. The camera status indicator
will blink green and red to indicate the upgrade is in progress and stop blinking when the update is
complete with success.
3. Check the upgrade status by opening the “.txt” le that is automatically generated after the update.
The update is successful if the text “result: successful” is in the document. Try upgrading the rmware
again if the text “result: failed” is found or the camera status indicator shows solid red.
Updating the Remote Controller Firmware
Ensure the DJI GO app has been updated to v1.2.0 before updating the remote controller. The
System Status bar in Camera View of the DJI GO App will ash several times if a rmware update is
available. Follow these steps to update the rmware via the DJI GO App.
Step 1- Check Battery and SD Card Capacity
1. The remote controller has at least 50% battery level.
2. Your mobile device is able to access the internet.
3. There is at least 30 MB of free space on your mobile device.
Step 2- Download and Update the Firmware
1. Go to the DJI GO App > Camera View > System Status bar > Overall Status. Tap Download the
firmware update package to download and update the firmware. Track the update progress from
progress bar in the DJI GO App. The status LED on the remote controller will blink blue during update
and blink green when update is complete with success.
Firmware update through the DJI GO app will not work with older versions of the remote controller
rmware. If the rmware update fails, follow the instructions below to update the rmware using the
traditional method:
a. Update the latest rmware package les from DJI ofcial web site.
b. Extract all downloaded les into the root directory of an SD card or USB ash drive.
c. Turn off the remote controller, Insert the SD card into a SD card reader or the USB disk onto the
remote controller USB port when remote controller is turned off.
d. Power on the remote controller and wait 60 seconds until the upgrade begins. Do not power off
the remote controller during the update.
e. It will take approximately 10 minutes to complete the rmware update. The camera will sound
a beeping sound and the Status LED on the remote controller shows solid blue to indicate the
update is in progress. The Status LED on remote controller shows solid green and beeping
sound will stop if the upgrade is completed with success.
f . If you do not have a SD card reader, you may insert the SD card into the gimbal and connect the
gimbal with remote controller to upgrade the remote controller.
You will only be able to update the remote controller rmware through the DJI GO app from
this point onwards.
67

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DJI INSPIRE 1 PRO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DJI INSPIRE 1 PRO in de taal/talen: Engels als bijlage per email.

De handleiding is 10,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van DJI INSPIRE 1 PRO

DJI INSPIRE 1 PRO Snelstart handleiding - English - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info