8
– The canopy is adjustable to various positions. The Canopy has a height
adjustment and a forward rotation function. To rotate open the zip located at
the top of the canopy.
The canopy has a fully ratcheting function to create complete coverage. Simply
pull on the front of the canopy to the desired position. The height can be easily
adjusted by simply sliding the canopy up or down the frame. The entire canopy
of canopy and pull forward.
– The canopy flap at the rear of the stroller can be rolled up and fixed with a
11. USING THE HARNESS SYSTEM
a) To fasten the harness system insert left and right side fasteners into the central
harness buckle.
b) To tighten the belts pull the strap on the front of the central harness buckle.
c) To release the belt system press the release button located on the seat in front
of the belt lock while pulling at the shoulder belts.
d) To release the fasteners squeeze the grooves on left and right side of the central
harness buckle.
e) Adjust the length of the crotch strap with the corresponding slider.
12. ADJUSTING THE HARNESS SYSTEM FOR NEWBORNS
a) Release the loops at the end of the shoulder straps from the triangle in the belt
b) Completely pull the shoulder straps out of the holes in the backrest.
c) Feed the shoulder straps through the two bottom holes. Make sure to feed the
straps back through the holes in the backrest mechanism and re-attach them
to the triangle.
d) To adjust the length of the shoulder straps to newborns please attach the inner
loop of the shoulder strap ends to the triangular ring. Switch back to the upper
13. REMOVING THE HEADHUGGER AND SHOULDER PADS (TOPAZ ONLY)
Remove the headhugger as soon as the headhugger does no longer fit over the
a) Remove the velcros of the headhugger on the top leh and right side on the
back of the seat cover.
b) Release the loops at the end of the shoulder straps from the triangle in the belt
c) Completely pull the shoulder straps out of the holes in the backrest.
d) Pull the shoulder straps through the shoulder pads and the headhugger. Make
sure to feed the straps back through the holes in the backrest mechanism and
2. ASSEMBLING THE HANDLES
3. ASSEMBLING THE FRONT WHEELS
4. ASSEMBLING THE REAR WHEELS
5. ATTACHING THE BUMPER BAR
a) Slide in latches on left and right side into gadgets sewn into the seat fabric.
b) Press the buttons on left and right side of the bumper bar to take it off.
6. FOLDING THE STROLLER
Remove all contents from the basket. Close the canopy. Remove the bumperbar.
a) Push forward the primary lock lever underneath the pedal button.
b) Lift the activated primary lock lever to release the stretching system.
c) Push down the secondary lock lever (extended bar on the right side of the
locking system).
e) Press folded stroller until the fold lock is engaged. Its recommended to fasten
the harness before folding the stroller.
7. OPENING THE STROLLER
a) Release the fold lock lever.
b) Open the stroller
c) Push the pedal button down until the locking system is engaged.
8. USING THE BRAKES
a) Engage Brake
b) Release Brake
9. AUTOMATIC FRONT WHEEL SWIVEL LOCKS – LOCK – UNLOCK
positions. The swivel Lock will engage automatically when it reaches the right
position.
b) Lift the Front Swivel Lock Lever up again to release the Swivel Lock.
10. EXTENDABLE CANOPY
– Attach the canopy adaptor on to the inside of the frame tubes of the buggy.
– To remove the canopy reverse procedure.
– Extend the canopy and place canopy rear flap behind the seat.
– Lie-flat position: Put the rear flap over the seat’s back rest and fixate it with the
two velcros underneath.
