651231
19
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
17 18
Perform the following trouble-shooting steps before sending it for servicing. For more
information, please refer to www.creative.com/support.
If there is no audio heard after connecting your phone or tablet with the Sound Blaster Roar via
Bluetooth........
It could be a case of your phone or tablet having a firmware bug that makes it unable to choose
the right audio codec. The Sound Blaster Roar can help enhance compatibility by disabling its
advanced audio codec and switching only to the basic codec*. However, we advise customers
facing this problem to update your phone / tablet with the latest firmware before attempting the
following steps below which may just solve this problem.
To bypass this bug (by disabling advanced audio codec)
1 Ensure that the speaker is Powered on
2 Press the Vol “-“and ROAR button together. (A voice prompt is heard indicating Advanced Codec
disabled). The speaker will reboot to remember your settings.
3 Power OFF and ON your audio device again
4 Connect to the Sound Blaster Roar via
Bluetooth
and play music
To restore advanced audio codec feature
1 Ensure that the speaker is Powered on
2 Press the Vol “+“and ROAR button together. (A voice prompt is heard indicating Advanced Codec
enabled). The speaker will reboot to remember your settings.
3 Power OFF and ON your audio device again
4 Connect to the Sound Blaster Roar via
Bluetooth
and play music
* You would only need to do this once and the Sound Blaster Roar will remember your preference.
How do I disable Voice Prompt?
l
With the speaker powered ON, press both Volume “–“ and Multifunction Button at the same time.
A prompt is heard indicating voice prompt is disabled.
How do I enable Voice Prompt?
l
On a speaker with disabled voice prompt, ensure that it is powered ON. Press both Volume “+“
and Multifunction Button at the same time. A prompt is heard indicating voice prompt is enabled.
What do I do if I find that the speaker is not behaving the way it should?
l
Should any of the above happens, we would recommend that you master reset the speaker.
In any state, press and hold the Power button for more than 10 seconds then press the Power
button again to turn on the speaker.
Alternatively
You can perform a factory master reset to clear paired device list.
1 Ensure your speaker is not connected to any Bluetooth device.
2 With your speaker powered on, Press and hold the Multifunction button until the white LED
blinks rapidly. Press and hold the Multifunction button and Volume “-“ button until a voice
prompt is heard indicating the speaker has been master reset and returned to pairing mode.
Why do I hear beep tones when I disable voice prompts?
The beep tones are meant to be indicators for the following items:
FAQ
1 Beep tone
2 Beep tone
3 Beep tone
Feature activated indicator
Feature confirmation indicator
Error indicator
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Creative Sound Blaster Roar Pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Creative Sound Blaster Roar Pro in de taal/talen: Engels als bijlage per email.

De handleiding is 1,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Creative Sound Blaster Roar Pro

Creative Sound Blaster Roar Pro Snelstart handleiding - Nederlands, Deutsch, English, Français, Italiano, Espanõl, Polski - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info