611235
6
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
5
ASSEMBLY
WARNING: Do NOT use this tower heater if any part has been under water.
Immediately contact Crane Customer Care or a qualified electrician to inspect or replace
the heater if necessary. Keep plastic wrapping away from children.
1. Open the packaging, take the unit out and unscrew the Cover Fixer.
Be responsible when handling the packing materials.
2. Insert the Glass Base into the bottom of the unit and screw on the Cover Fixer.
3. Place the unit upright on a flat floor before use.
OPERATION AND USE
1. Place the heater on the floor in the desired location.
WARNING: Keep combustible materials such as furniture, pillows, bedding,
papers, clothes and curtains at least 3 feet from the front of the heater. Also
keep them away from the sides and rear.
2. Ensure that the heater’s Power is Off.
3. Plug the heater into a 120VAC outlet. This heater has a
polarized plug ((one blade is wider than the other). As a
safety feature to reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
4. Choose your desired heater setting (below) and enjoy your new tower heater.
Display Panel
1. Press to turn on the heater, press it again to turn off the heater.
2. When the unit is on, press
to switch Low/High power.
3. When the unit is on, press
to switch On/Off the oscillation function.
4. When the unit is on, press
H / °F to set time and temperature.
a) Set Time: Press
H / °F once, then use and to set time from 1h to
12h.
b) Set Temperature: Press
H / °F a second time, then use and to set
temperature in the range 59-95 °F. Each time you press the buttons
or
the temperature will increase or decrease by 1°F.
5. Press
H / °F a third time to confirm your set time and temperature. Once you
have done so, the display will read the current room temperature and will
automatically maintain the set temperature by turning the heating elements on
and off during the set time.
Note: If you touch the sensor H / °F , the control light will flash for a time of 5
seconds. If you do not press any button within 5 seconds or you press a button other
than SET,
or , then the LED display will display the temperature in the room.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Crane EE-8079 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Crane EE-8079 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info