34
SERVICING
Before contacting your local Service Force Centre, check
your machine against the simple maintenance guidelines
given below.
The appliance does not start up
* Check if the door is closed properly.
* Check if the appliance is plugged in.
* Check the fuse.
* Check if the program dial is in the correct position.
THE MACHINE DOES NOT FILL
* Check if the water tap is on.
* Check if the tap is clogged.
* Check if the inlet hose is bent.
* Check if the water inlet filter is clogged.
THE MACHINE EMPTIES AS IT FILLS
* The end of the drain hose is too low (see page. 27)
THE MACHINE DOES NOT DRAIN OR SPIN
* Check if the drain hose is bent or squashed.
* Check if the drain filter is clogged.
* Check if the selected program includes spinning.
* Check if the ‘Rinse Hold’ button is pressed.(Mod.: LF 550
and LF 850).
THE MACHINE LEAKS OR OVERFLOWS
* Too much washing powder.
* Unsuitable washing powder.
* Check the joints for leaks. It is rather difficult to see the
water running along a hose.
THE MACHINE VIBRATES OR IS NOISY
* Check if all transport devices have been removed.
* Check if the appliance touches the walls or furniture.
* Check if the legs are adequately levelled and the nuts
tight
If, after above checks, there is still a fault, call your Local Service Centre. Please make sure you give the model and serial
number of the appliance and the purchasing date.
IMPORTANT REMARK: This washing machine is provided with the latest technical advances in washing and water level
reduction. It is quite right that you do not see the water through the door.
