569549
3
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
3
SETTING UP
Download Contour Storyteller to your PC/Mac from the Contour website. The
link below will help you set up your camera to make sure it is registered,
update the time on your camera, and get the settings dialed to your custom
configuration.
http://www.contour.com/startROAM2
CHARGING THE BATTERY
+ Slide the door up to open.
+ Connect your camera to a PC/Mac using the supplied USB Cable.
+ The Battery Status LED indicates the charge level of the battery.
It will change colors from red to green as the battery charges.
+ Charge is fully complete when the Battery Status LED turns green.
This can take up to three hours.
FORMATTING THE microSD CARD
Format the microSD Card prior to recording so your camera is able to properly
read and write to it.
Check that the Record Slider is in the off position. Open the back of your
camera then press and hold the Format Button until the camera beeps (three
to five seconds), then release the Format Button. The microSD Card LED will
flash while the card is formatting and then turn solid green when the format is
complete.
The ContourROAM2 is compatible with:
+ SDSC (standard capacity) class 2 microSD Cards up to a capacity of 2GB.
+ SDHC (high capacity) class 4, 6, or 10 microSD Cards up to a maximum
capacity of 32GB.
Camera Status
Pressing the Status Button will:
+ Activate the Laser Line for 15
seconds.
+ Display the current battery and
memory status.
ERROR CONDITIONS
+ Battery LED flashes red: the battery is almost empty.
+ Memory LED flashes and there are continuous beeps: the microSD Card
cannot be accessed because the card is full, missing, or not
properly formatted.
CAMERA SETTINGS
To adjust the settings on your camera, download and install the Contour Story-
teller app to your PC/Mac.
http://contour.com/software/storyteller
With the camera connected to your computer, go to the Tools >> Configure
Camera menu in Contour Storyteller.
Here you can adjust:
Video Mode:
- 1080p video at 30 frames per second
- 960p video at 30 frames per second
- 720p video at 30 frames per second
- 720p video at 60 frames per
second (Default)
RECORDING
+ Start Recording: Move the Record Slider Lock so that the red square is not
showing and then slide the Record Slider forward. Your camera will power
on, beep once, and the Record Status LED will turn red, indicating that the
camera is now recording a video.
+ Stop Recording: Slide the Record Slider back. Your camera will beep twice,
and the Record Status LED will switch off, indicating that your camera has
stopped recording and is powered off.
+ Record Slider Lock: The small switch on top of the Record Slider is used to
keep the Record Slider from turning on or off. To move the Record Slider
forward or back, have the Record Slider Lock moved so that the red square
is not showing. To prevent the Record Slider from moving in either the
record or off positions, move the Record Slider Lock so that the red square
is visible.
Caution: formatting the card will erase everything on it
BATTERY STATUS LED
Green: 50% or more
Yellow: 20 to 50%
Red: 20% or less
MEMORY STATUS LED
Green: 50% or more
Yellow: 20 to 50%
Red: 20% or less
Photo Mode:
- 5MP photos every 1, 3, 5,
10, 30,60 seconds
Microphone Sensitivity:
- Audio level
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Contour Roam2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Contour Roam2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Contour Roam2

Contour Roam2 Gebruiksaanwijzing - Deutsch - 6 pagina's

Contour Roam2 Gebruiksaanwijzing - Français - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info