652347
32
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
32
Water supply
The water feed pipe is to be connected via the filter valve (accessory Z261), to the connection on the
unit (see detailed illustration). The installation of the filter valve should be made as close as possible
to the steam humidifier.
Note: Instead of the filter valve, a shut-off valve (essential) and a water filter 5 µm (not essential, but
advantageous) can be used.
Warning - danger of damage! Union nut at the humidifier connection must be hand-tightened
only.
The following connection specifications must be observed:
Connection on unit: G 3/4" (Union nut)
Min. inner Ø of supply line: 8 mm
Admissible mains pressure 1.0 to 10.0 bar (hammer-free system)
For mains pressures >10 bar, connection must be made via pressure reducing valve (adjusted to 2.0
bar). For mains pressures <1.0 bar please contact your Condair supplier.
Supply rate: 1l/min per 15 kg/h steam output
Admissible supply temperature: 140 °C
The connection material must be pressure-proof and certified for use in the drinking water
supply.
Important! Before connecting the water line, the line should be well flushed out.
Water quality: For the water supply, use exclusively fresh tap water (raw water), partially softened
water (softened water which is mixed with drinking water to approx. 1/3 of its original hardness).
Unmixed softened water must not be used.
If you want to operate the Condair CP2 with partially softened water or if you need more ample
information on water quality please contact your Condair supplier.
The water must not be mixed with any additional disinfectant: it would be distributed in the surrounding
air during the evaporation process and lead to irritation of the mucous membrane or allergies.
Water drain
The water drainage is effected without pressure. Thus, in order to avoid any damming of the water, the
drain pipe must be led straight down into a drainage funnel, through a piece of hose (accessory
DS22 or DS60) of min. 50 cm. Subsequently, the drain pipe is connected via siphon to the waste
water system of the building. The minimum internal diameter of 30 mm (models N4/H4: Ø22 mm) must
be maintained for the entire length. Make certain that the drain pipe is correctly fixed and easily
accessible for inspections and cleaning purposes.
The following connection specifications must be observed:
Drainage capacity: approx. 2,5l/min per 15 kg/h steam capacity
Drainage temperature: 60100 °C
Warning! Use only temperature-resistant installation materials!
Connection on unit (hose connection): Ø30 mm (models N4/H4: Ø22 mm)
Warning! Hose must be secured to the unit connection with a hose clamp.
Min. inner Ø of drain line: 30 mm (models N4/H4: Ø22 mm)
Min. downslope after siphon: 10 %
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Condair CP2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Condair CP2 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info