652347
5
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
5
2 For your safety
Intended use
Steam humidifiers Condair CP2 are intended exclusively for direct or indirect room
humidification within the specified operating conditions. Any other type of applica-
tion, without the written consent of your Condair supplier, is considered as not conforming
with the intended purpose. The manufacturer/supplier cannot be made liable for any
damages resulting from improper use. The user bears full responsibility.
Operation of the equipment in the intended manner requires that all the information in
these instructions is observed (in particular the safety instructions).
Please contact your local Condair distributor if the steam humidifier Condair CP2 is to be
used in a steam-bath.
General safety instructions
The steam humidifier Condair CP2 must only be installed, operated serviced and in all
cases repaired only by persons who are adequately qualified to undertake such
work and are well acquainted with the product. Ascertaining the qualifications is the
customers responsibility.
Caution, danger of electric shock! The Condair CP2 is operated with mains
voltage. Before commencing work on the Condair CP2, the unit is to be rendered
inoperative in accordance with section 6.3 and prevented from further inadvertent
operation (isolate unit from the electrical power supply, isolate water supply).
Observe all local safety regulations.
relating to the operation of mains-operated electrical and electronic equipment
and the provision of water, steam and electrical installations
Poorly maintained humidification systems can endanger health. The servicing inter-
vals should therefore be adhered to without reservation and the servicing work
carried out correctly.
If it is suspected that safe operation is no longer possible, then the Condair CP2
should immediately be shut down and secured against accidental power-up. This
can be the case under the following circumstances:
if the Condair CP2 is damaged
if the Condair CP2 is no longer operating correctly
if connections and/or piping are not sealed or cables are loose
The Condair CP2 must only be operated under the specified operating conditions
(see section 7).
The Condair CP2 is protected according to IP20. Make sure the units are installed in
a drip-proof location
Caution! If the Condair CP2 is installed in an area without a water drain, water sensors
must be fitted in the area, such that in the event of leakage in the water system, the water
feed is safely shut off.
Caution, danger of corrosion! In order to avoid damage, no corrosion-sensitive
components should be located in the area of the aerosol streams.
No work/repair should be carried out on the Condair CP2 other than that described in
these instructions.
Use exclusively original accessories and spare parts available from your Condair
supplier.
No modifications must be undertaken on the Condair CP2, the accessories and the
options without the express written consent of Axair Ltd.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Condair CP2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Condair CP2 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info