802886
44
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
ENEN
8786 VR2010VR2010
SIDE VIEW
1. Dust bin button
2. Dust bin / water tank
3. ON/OFF button
4. Power socket
DUST BIN
1. Water tank
2. Suck passage
3. Suction motor
Warning: Never wash the dust bin with water,
the suction motor is inside the container.
Magnetic strip
Place a magnetic strip in places, where you
do not want the vacuum cleaner to enter.
Remote control
1. ON/OFF button
2. Automatic mode
3. OK button – to conrm the
selection
4. Edge cleaning path mode
5. TIME SETTING
6. Sound ON/OFF button
7. Recharging button – the vacuum
cleaner searches for the charging
station
8. Direction buttons
9. FULL GO mode
10. Circular mode
11. Plan button
1 2
3
4
1
3
2
1
2
3
4
5
6
7
8
9
10
11
BEFORE FIRST USE
1. Insert the batteries into the remote control.
2. Apply the cleaning brushes as indicated by R and L.
3. Connect the charging base to an electrical outlet using the AC adapter. Place the charging base against the
wall and remove obstacles about 1 meter at two sides and 2 meters forward. The indicator light must light
up when connecting to a mains power supply. It is recommended to x the charging base to the oor, e.g.
by double-side mounting tape. Place the power supply cable so to avoid tangling of the vacuum cleaner.
4. Place the vacuum robot onto the charging base.
5. The vacuum robot battery will start charging automatically. Allow the battery to charge for more than
6hours before rst use. The charging status ashes on the display, it will stop ashing after the battery if
fully charged. If the battery is near the discharge point, the vacuum cleaner will automatically search for
the charging base.
6. Before using the vacuum robot, please remove any objects from the oor that can prevent the vacuum
robot from operating (cables, chairs, small items, inappropriately placed carpet, etc.)
Cleaning mode – the ON/OFF button is in the ON position, the display panel is ON.
Stand-by mode – the ON/OFF button is in the ON position, the display panel is ON and the vacuum robot does
not operate. To activate it, press any cleaning mode button.
Sleep mode – the ON/OFF button is in the ON position, the display panel is ON. The vacuum robot enters this
mode automatically after 45 seconds of inactivity.
TIME SETTING
Make sure that the vacuum robot is ON and not charging.
To set the time, press the button on the remote control. First two digits begin to ash to set the time. To
set the values, use the ˄ ˅ buttons. To conrm the time, press the OK button. Then the right side of the display
starts to ash to set the minutes. Follow the same steps as the hour setting.
Charging status Battery charging Discharge of the battery
almost complete
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Concept VR2010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Concept VR2010 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 32,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info