521994
23
Verklein
Vergroot
Pagina terug
1/110
Pagina verder
ComNav Vector G2 & G2B Installation & Operation Installation
Document PN 29010078 V2.0 - 21 -
DRAFT #3 – 29 May 2009
Mounting
The Vector G2 can be mounted on a fixed base, or on a pole; parts for both options are
provided with system kits:
The fixed base option is for mounting the G2 on a flat surface – a cabin roof, a
mounting plate on the mast, and so on.
The pole option is easier to use when there is no location with enough un-obstructed
flat space to accommodate the fixed base (and/or the G2 itself), or when it is desired
to mount the G2 high up above all surfaces.
In either case, make sure that you have enough cable length to route the G2’s interface cable
as far as required into the vessel (see Cables & Extensions on page 26 for more details).
Fixed Base
Figure 4 – Mounting using the Fixed Base
1) Use the fixed base’s four slotted edge-mounting holes (at the four corners of the
base) as a template; position the base so that it is aligned as closely as possible to
the orientation you want. Then mark and drill holes in the flat surface, for the
fasteners (not supplied) which you will be using to fasten the base to that surface.
2) The fixed base has a choice of four tunnels for routing the G2’s power/data along the
mounting surface. Or, you may want to route the cable directly through the surface; if
so, drill a fifth hole – de-burred, & with diameter at least slightly larger than the G2’s
cable – in the surface, approximately where the centre of the fixed base will be.
3) Run the connector end of the G2’s power/data cable through the centre opening in
the fixed base, from the bottom side.
4) Align the keyway in the cable’s plug connector to the key in the G2’s data/power
connector, and then press them together, fully seating the plug. Align, then engage
& rotate the cable connector’s locking ring (clockwise rotation to lock, and
counter-clockwise to un-lock), until you feel a definite “click”.
Figure 5 – Connecting the Power/Data Cable
www.busse-yachtshop.de | [email protected]
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ComNav Vector G2B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ComNav Vector G2B in de taal/talen: Engels als bijlage per email.

De handleiding is 2,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info