635863
3
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
3
To power EWH if EWH is not filled with water.
To remove the protective cover when the power is on. EN
Use EWH without grounding or use water pipes as grounding.
To connect EWH to water main with pressure exceeding 0.7 MPa.
To connect EWH to the water supply without safety valve.
To drain water from EWH with power switched on.
To use spare parts not recommended by the manufacturer.
To use water from the EWH for cooking.
To use water containing impurities (sand, small stones), which might lead to EWH and safety
valve breakdown.
To modify design and installation dimensions of EWH brackets.
Ambient temperature, where EWH is operated, shall be within the range from c to 40° C.
Water freezing in EWH at negative temperatures cause its malfunction, which is not a guarantee case.
Attention should be paid to children so that they do not play with EWH. EWH is not intended
for use by persons (including children) with limited physical, sensory or mental capabilities, or
by persons who do not know how to use the EWH, except for cases when this happens under
the supervision or instructions by persons responsible for safety of the EWH.
6. Installation and connection
All installation, plumbing and electrical works must be performed by qualified personnel.
6.1.
Arrangement and
installation
EWH installation shall be performed in accordance with marking on the housing and the following
table:
Model
Volume (l)
Arrangement
IBL-O 10, 15
Pipes down
IBL-U
10, 15
Pipes up
It is recommended to install EWH as close as possible to the place of hot water using to reduce heat loss in the
pipes.
When drilling (making) holes in the wall, you should consider cables, ducts and pipes in the wall.
When choosing EWH installation place take into account total weight of EWH filled with water. Wall
and floor with low carrying capacity shall be reinforced accordingly.
EWH is suspended with housing bracket on the anchor fixed into the wall. Hooks mounting on the
wall shall exclude spontaneous moving of EWH brackets.
To perform maintenance and servicing of EWH the distance from the protective cover to the nearest
surface in the direction of removable flange axis shall be at least 0.5 m.
In order to avoid damage of the user’s and/or third parties’ property in the event of a faulty hot
water system, it is required to install EWH in spaces with waterproofing and drainage to the
sewers, and in no case to place under items exposed to the water under EWH. When placed
in unprotected areas a protective plate (not supplied) with drainage into sewers shall be
installed under the EWH.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cointra Thermex Blitz IBL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cointra Thermex Blitz IBL in de taal/talen: Engels als bijlage per email.

De handleiding is 0,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info