646307
25
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
25 EN
After Use / Cleaning the Device
CAUTION!
Empty and clean the water reservoir each time after you use the device to prevent
deposits in the reservoir and thus damage to the device!
The water reservoir cannot be opened while it is pressurised. Pull out the mains
plug and keep pressing the
steam trigger until no more steam emerges from the
device. The reservoir cap can then be screwed off.
Always pull the mains plug out of the plug socket when you are not using the device,
before you open the water reservoir or remove an attachment.
The attachment and the water in the reservoir may still be hot shortly after use. You
should therefore wait until they have completely cooled down before you remove the
attachment or empty the water reservoir.
Never immerse the device in water or other liquids!
Never touch the device, the cable or the plug with wet hands.
To extend the useful service life of the steam cleaner, it should be regularly descaled
with a standard commercial descaling agent. Note the manufacturer's instructions on
the packaging of the descaling agent.
Do not use any caustic or abrasive cleaning agents or cleaning pads to clean the
device. These can damage the surface.
Empty the water reservoir: Unscrew the reservoir cap and remove it. Hold the device
over a sink or similar outlet and allow all of the water to run out of the reservoir.
Wash the cleaning cloth and oor cloth after every use in accordance with the washing
instructions.
Clean the attachments if necessary with clear, warm water.
If necessary, wipe down the outside of the device with a soft, slightly damp cloth and
dry it with a soft cloth.
Allow all device and accessory parts to dry completely before you store them in a
clean and dry place that is inaccessible to children.
Troubleshooting
If the device should stop working properly, rst check whether you are able to correct the
problem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem Possible cause/solution
Water emerges from
the attachment.
The device has not yet reached operating temperature.
Wait until the control lamp has gone out.
Water may emerge from the attachment when you rst
start using it. This is normal and does not constitute a
defect with the device.
06456_de-en-fr-nl_V1.indb 2506456_de-en-fr-nl_V1.indb 25 03.07.2015 10:28:0403.07.2015 10:28:04
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cleanmaxx Z 06456 - HS101U bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cleanmaxx Z 06456 - HS101U in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info