646306
18
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
EN 18
3. When the control lamp goes out, the device is ready for
use. Then move the attachment in strokes over the fabric
and press the steam release button (11) at regular inter-
vals as you do so. However, do not keep the steam re-
lease button held down constantly! It is important for the
attachment to touch the fabric so that it is smoothed.
If the control lamp lights up during use, the device is reheating. Do not press the
steam release button during the heating process in order not to slow this down
and to prevent a danger of scalding from hot water which may escape. Wait until
the control lamp goes out again.
4. If steam stops being produced, the water reservoir is empty. Re ll it (see theFill-
ing the Water Reservoir” chapter). Never use the device without water to prevent
damage to the device!
After Use
CAUTION!
Remove the plug from the socket before cleaning.
Shortly after use, the device may still be very hot. You should therefore wait a few
minutes until it has completely cooled down before you remove the attachment used,
clean the device and/or store it away.
Never immerse the device in water or other liquids!
Never touch the device, the cable or the plug with wet hands.
Do not use corrosive or abrasive cleaning agents or cleaning pads for cleaning.
These can damage the surface.
Descale the device regularly if you are not using distilled water to ll the water
reservoir.
1. Remove the mains plug from the plug socket.
2. Allow the device to cool down completely. Place it down on a water-resistant and
heat-resistant surface.
3. Empty the water reservoir. To do this, remove the seal plug from the water reservoir,
hold the device over a sink or similar outlet and turn it upside down. Allow all of the
water to ow out of the reservoir.
4. If necessary, use the cleaning brush (8) which is supplied to brush uff off the at-
tachments. The brush attachment (12) can also be rinsed with water. However, it is
essential that you allow it to dry completely before you attach it to the device or store
it away!
5. If necessary, wipe down the outside of the device with a soft, slightly damp cloth and
then dry it with a soft cloth.
Descaling
Use a standard commercial descaling agent to descale the device. Make sure that the
descaling agent is suitable for steam devices. Please note the instructions for use of
the descaling agent for details about the mixing ratio of water and descaling agent and
about the length of use.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cleanmaxx Z 01926 - DF-A002 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cleanmaxx Z 01926 - DF-A002 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info