562007
21
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
21
2. Completely unwind the mains cord from the hook (3), insert it in the cord bracket (2) and
connect it with an easily accessible socket whose mains voltage corresponds to the device’s
technical data.
3. Press down the unlocking pedal (8) and set the handle (14) to
a comfortable position.
4. Using your foot, press the on / off switch
(7) to switch on
the device.
5. Run the device to a corner of the carpet.
6. Push the device forward along the carpet border and depress the button for emitting the
cleaning solution (1). This will apply and brush the cleaning solution into the carpet. In the
process, walk next to the device. Do not step on the wet carpet! Once you have arrived
at the other end of the carpet, release the button.
7. Now go over the same strip in reverse. The dirty water will be vacuumed up.
8. Start the next strip slightly overlapping the cleaned carpet strip. Work with even forward
and backward movements up to the other edge of the carpet. In the event of stubborn dirt,
go over a strip of the carpet several times if necessary.
9. When the dirty water reservoir (11) is lled to the Max marking, it must be emptied (see
the “After Use” chapter, “Cleaning the Device” section). If you would like to empty the dirty
water reservoir, ll up the fresh water reservoir, or nish cleaning, switch off the device
by pressing the on / off switch
, lay it on the prepared cloth, and bring the handle to the
upright position.
10. Remove the mains plug from the mains socket.
After Use
1. Let the freshly cleaned carpet dry completely.
2. Do not step on it as long as it is still wet. If this cannot be avoided, lay out white or colour-
fast cloths and step on them.
3. If the cleaning solution ends up on wood oors or furniture, wipe it up.
4. Vacuum clean the dry carpet with a vacuum cleaner. Use a brush adapter for this (if possible).
5. After use, the water reservoirs have to be emptied and rinsed out (see the “Cleaning the
Device” section). Do not store or transport the device when liquid is still in the reservoirs.
Cleaning the Device
CAUTION!
Prior to each cleaning, pull the plug out of the socket.
The lters may not be cleaned in the washing machine.
Only air dry the lters and do not in any case use a hair dryer.
When cleaning the housing, do not use any chemical cleaners. They could damage the device.
1. Make sure that the mains plug is pulled out.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cleanmaxx Z 01097 - VC-9387S-7 Carpet Cleaner bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cleanmaxx Z 01097 - VC-9387S-7 Carpet Cleaner in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info