150203
26
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
26
27
11. The set parameters must be memorised. Select line STORE with
keys
,
and press RC key < or >. A red bar will appear what
means a successful memorisation.
12. To return to table VOLUME, press RC key OK.
Headphones.
13. The TV set (if appropriate to a certain model) has a possibility
of an independent volume control. Select line HEADPHONES with RC
keys
,
. Press RC key < or >. Table SOUND/HEADPHONES will
appear on the TV screen.
14. Select the parameter to be adjusted: volume, balance, high or
low frequency strengthening, language with RC keys
,
, a two
language volume signal is broadcast, while set a desirable volume
with RC key
< or >.
15. The set parameters must be memorised. Select line STORE with
keys
,
and press RC key < or >. A red bar will appear what means
a successful memorisation.
16. To exit from MENU table press RC key OK three times.
Note: The red button of the remote control is used to get directly into
the VOLUME menu.
Remote control button
Selection of five defined settings: “PERSONAL” (to be set in
VOLUME menu), “STANDARD”, “LANGUAGE”, “MUSIC” and
MOVIE.
Remote control button I/II in TV mode- button to select DUALI/DUALII for two-channel
transmissions.
In teletext - button to select the teletext languages.
SOUND
VOLUME 20
BALANCE 00
SOUND AV STEREO
EFFECT OFF
AVL STANDARD
LANGUAGE LANGUAGE1
STORE
EQUALIZER
HEADPHONES
SOUND / EQUALIZER
MODE PERSONAL
EQUALIZER 00
100 Hz +31
330 Hz +23
1000 Hz +15
3300 Hz +25
6600 Hz +31
STORE
SOUND/HEADPHONES
VOLUME 31
BALANCE 00
BASS +15
TREBLE +20
SOUND LANGUAGE LANGUAGE1
STORE
PICTURE
MODE PERSONAL
BRIGHTNESS 20
CONTRAST 40
SATURATION 32
SHARPNESS 20
HUE 00
TINT NORMAL
NOISE REDUCION OFF
STORE
Regulation of picture parameters
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM TUNE
1. Push the RC button OK and keep it about 2 seconds, until the MENU
table will appear on the screen.
2. Using RC buttons
,
select the line PICTURE.
3. Push RC button
< or >. The table PICTURE will appear on the
screen.
4. Using RC buttons
,
select the line with desired picture
parameter for regulation: BRIGHTNESS, CONTRAST, SATURATION
or SHARPNESS.
5. Using RC button
< or > set desired value for adjustable parameter.
6. Using RC buttons
,
select the line TINT. Using RC button < or
> you can select desired colour of picture: NORMAL (neutral, grey),
WARM (pink), COLD (bluish).
7. Using RC buttons
,
select the line NOISE REDUCION. Using RC
button
< or > you can select desired level of noise reducion: OFF,
WEAK, MIDDLE, STRONG.
8. You can select one of four fixed modes of picture parameters.
Using RC buttons
,
select the line MODE. Using RC button < or
> you can select desired modes of picture parameters: PERSONAL,
(it suits the fixed meanings in the table PICTURE), STANDARD,
DYNAMIC (enlarged contrast), SOFT (reduced contrast).
Quick adjust of sound and picture parameters
BRIGHTNESS 15
VOLUME 15
CONTRAST 15
SATURATION 15
SHARPNESS 15
Regulation of sound parameters
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM TUNE
1. Push RC button OK or MENU which is on the front of TV panel. You will
see the regulation’s bar VOLUME on the screen. Using the RC button OK
or TV button MENU, you can select the picture parameters: BRIGHTNESS,
CONTRAST, SATURATION and SHARPNESS.
2. Push RC button
< or >, or buttons P+, P- which are in the front of TV panel,
set the parameter which you want.
Notes:
1. It is possible to regulate the sound just pushing RC button
< or >, when
there is no selected any sound or picture parameter.
2. The regulation bars of parameters turn of approximately in 3 seconds after
the last action.
1. Push the RC button OK and keep it about 2 seconds, until the MENU
table will appear on the screen.
2. Push RC button
< or >. The table SOUND will appear on the screen.
3. Push RC button
< or > and set the sound’s level which you want.
4. Select parameter BALANCE with RC keys
,
. By pressing RC
keys
< or > set a desirable volume balance between volume
channels.
5. Select parameter AVL (automatic volume level) with RC keys
,
. If pressing RC keys < or > you select version OPERATE,
during translation a fixed volume level will be maintained automatically. If you select version
STANDARD – AVL this function will be disabled.
6. Select parameter EFFECT with RC keys
,
. If pressing RC keys < or >you select version
WIDE, the volume will be reproduced with a dimensional effect. If you select version OFF
this function will be disabled.
7. Select parameter SOUND AV with RC keys
,
. By pressing RC keys < or > you may select
what volume signal -MONO or STEREO - you will receive from exterior signal sources via AV inputs.
8. If the receiving channel is broadcast with two language volume, select parameter LANGUAGE
with RC keys
,
, while by pressing RC key < or > select a desirable language LANGUAGE1 or
LANGUAGE2.
9. The set parameters must be memorised. Select line MEMORY with keys
,
and press RC key
< or >. A red bar will appear what means a successful memorisation.
Equaliser.
10. To set a desirable characteristic of the volume channel you may use an equaliser function. Select
line EQUALISER with RC keys
,
. Press RC key < or >. Table SOUND/EQUALISER will appear
on the TV screen. Select one of five available modes: PERSONAL (values are set in the table of
frequencies hereunder by selecting certain frequency with RC keys
,
, while a desirable value
is set with RC keys
< or >), STANDARD, VOICE, MUSIC and FILM.
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clatronic ctv 652 st vt bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clatronic ctv 652 st vt in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info